Volvo P1 Generic Gas Cap Lanyard / Tether
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I bought a used Volvo C30 and saw that it didn't have the OEM gas cap. I didn't like the fact that it didn't have a…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 121
- Makes
- 0
- Views
- 585
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I bought a used Volvo C30 and saw that it didn't have the OEM gas cap. I didn't like the fact that it didn't have a tether (and didn't want to hold it or place on the roof), so I made a tether to hold it in a similar fashion to the OEM one. I think it came out pretty well.
I designed it with this particular cap that was with the car when I got it. I think it'll fit other caps that are around 70mm in diameter as I designed it with that in mind. I stays in place due to a slight lip on the cap.
I used TPU so it'll flex. I used 50% infill, but higher infill percentage will probably last longer.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.32
Infill:
50
Filament: Generic TPU Black
Category: Automotive