Volvo P1 Generic Gas Cap Lanyard / Tether
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a used Volvo C30 and saw that it didn't have the OEM gas cap. I didn't like the fact that it didn't have a…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 585
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I bought a used Volvo C30 and saw that it didn't have the OEM gas cap. I didn't like the fact that it didn't have a tether (and didn't want to hold it or place on the roof), so I made a tether to hold it in a similar fashion to the OEM one. I think it came out pretty well.
I designed it with this particular cap that was with the car when I got it. I think it'll fit other caps that are around 70mm in diameter as I designed it with that in mind. I stays in place due to a slight lip on the cap.
I used TPU so it'll flex. I used 50% infill, but higher infill percentage will probably last longer.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.32
Infill:
50
Filament: Generic TPU Black
Category: Automotive