Sharpen Thy Blades: KCD II Grindstone Station for Philips OneBlade

Sharpen Thy Blades! – Inspired by Kingdom Come: Deliverance II

Bring the atmosphere of a Bohemian forge into your bathroom! This wall mount for the Philips OneBlade is a direct homage to the iconic grindstone mechanics from Kingdom Come: Deliverance II.

Your OneBlade doesn't just sit there—it rests like a masterfully forged sword directly on the grindstone, ready for the next duel (or your next shave).

Key Features:

• Iconic Grindstone Design: The centerpiece of the station is the detailed grindstone, which serves as the primary holder for your OneBlade.

• Magnetic Locking System: The baseplate features embedded pockets for 5x3 mm magnets, ensuring your modular components stay securely in place.

• Integrated Towel Hooks: Practicality meets design. Two robust hooks on the underside turn this mount into a full-featured bathroom station.

• Optimized CATIA Design: The model is fully modular, allowing all parts to be printed flat. This ensures superior surface quality and makes the printing process fast and completely support-free.

• KCD II Aesthetics: High-quality engravings of the Bohemian Lion and the official KCD II logo complete the knightly look.

Assembly Guide & Bill of Materials

Required Parts (Quantity):

• 1x Baseplate: The foundation of your station.

• 1x Backplate: The back wall with engravings and wall mounting holes.

• 2x Sideplate: The lateral supports.

• 1x Grindstoneholder: Fixes the grindstone onto the baseplate.

• 1x Holder: Central support for the handle.

• 1x Oneblade Ramp: Positioning aid for the shaver.

• 2x Grindstone: The two halves of the grindstone (must be glued together).

• 2x Hook: Towel hooks for the underside.

• 2x Connector 1: Large connection pins.

• 8x Connector 2: Small locking pins.

Important Assembly & Printing Notes:

1. Embedding Magnets (During Print): The pockets in the Baseplate and modules are designed to have magnets embedded during the printing process. Add a Pause command in your slicer just before the pockets are capped, insert your 5x3 mm Neodymium magnets (check polarity!), and resume the print.

2. Grindstone Assembly: Glue the 2x Grindstone halves together flush before placing them into the holder.

3. Final Assembly: Connect the Backplate and Baseplate using the Sideplates and Connector 1. Then, secure all other modules and the side walls using the 8x Connector 2 pins. A drop of superglue is recommended for permanent stability.

4. Hooks: Simply insert the two Hooks into the designated slots on the underside.

Print Settings

• Material: PLA

• Layer Height: 0.12 mm - 0.16 mm (recommended for fine details and perfect fitment)

• Wall Loops: 3

• Infill: 10-15%

• Support: Not required (Support-free)

Compatibility

Precision-fitted for the Philips OneBlade 360 (QP4631/65) based on the official contest mockup.