1 / 4
Kukirin g2 mudguard / rear fender extender (clip on)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kukirin g2 mud guard / rear fender extender Clips in - no glue or zip ties needed.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 238
- Wydruki
- 0
- Wyświetlenia
- 1325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (28)Powiązane
Kukirin g2 mud guard / rear fender extender
Clips in - no glue or zip ties needed.
It clips in on the sides (bottom part).
Printing recommendations:
At least 15% infill, PETG/ASA/ABS but PLA will work too.
Supports needed. I printed it standing on the fender, fasteners toward the top (see pictures).
Any questions or issues - let me know in the comments.
