PTP Wall Clock Bracket (Waveshare RGB Matrix connector)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A connecting bracket to join two Waveshare RGB Matrix displays for a PTP Wall Clock.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Bracket to join two Waveshare 64x32 RGB Matrix displays using the magnetic screws included with Waveshare's kit.
This was made to finish off a build of the open source PTP Wallclock display.
Print it with any kind of PLA, then use the included screws to join the two displays together, so you can display a full PTP timestamp across two displays. I set the tolerances on the screw holes a little loose so it should work within about a 0.2mm variance.
The screw holes have built-in standoffs to make it easier to get your fingers (or a tool) around the screws, since they aren't keyed for any kind of wrench or driver.