Mini LMT Stand (or other mini monster trucks/crawlers)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand for the Losi Mini LMT, which might also be useful for other ~1/16 scale RC.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print the base in ABS or ASA so it doesn't creep over time, or don't it might be fine in PLA/PETG it's only a little RC sitting on it.
Print the top piece in TPU if you want a bit of grip, use foaming TPU if you want it to be extra soft for the delicate bottom of your truck.
The top piece presses into the base, if that wasn't obvious. Multi-material printers may be able to accomplish this in one print, in place. If anyone does that I will be very interested to see it please post a make.
I've included a .f3d and a .STEP for easy remixing.
Have fun!