Keykeg Cloche Peg Version 2.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A retaining peg for recycled keykeg cloches which can raise the local soil temperatures and protect tender plants.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A choche can raise the local soil temperature by up to 10°C and hasten germination of direct-sown crops, or offering protection to tender crops.
Keykegs can be recycled into excellent closhes but can blow away in the wind. This peg is aimed at holding them in place, and keeping your plants safe.
This version lengths the spike and thins their walls to allow it to be driven into the ground more securely. Additionally, pegs have been added to allow the peg to more positively hold the cloche with holes punched in the site - a paper punch was used for this purpose. These modifications are aimed at providing better wind resistance.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes - Touching Build Plate
Resolution:
0.2mm
Infill:
20%
Filament:
FilaPrint rePLAy - Recycled PLA
Orange Caramel
Notes:
For printing, I've laid this on its side along the spike, across the flat on the head. Auto support put a little in the vee of the spike and under the pegs at the top.
Also printed in FilaPrint rePLAy - Recycled Black PLA
The Keyitskegs has a double skinned of clear PET, this is what's recycled into the Cloche. Mine came depressurised from the brewery, Blackened Sun.