1 / 1
RAK-1W starter kit adapter for YetiWurks outdoor node (WIP)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for the Yeti Wurks enclosure to convert it to use the WisMesh 1W Booster Starter Kit inside.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a WIP to try and adapt my yeti wurks outdoor solar node and convert it over to the new WisMesh 1W Booster. I modeled it based on the enclosure used and the components included in the original. I have not yet test fitted or printed it at this time.
UPDATE 03/04/26
hole spacing for the top and bottom box mounting holes was off. I have fixed that. Test fitted the WisMesh 1W Booster and that is spot on. Re-printing with the V2 now.
