137 modeli
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Filament Drawer is a great way to record and…
This is an enclosure for the Lilygo T-Beam 1W Lilygo's T-Beam 1W works well with Blackout Comms , firmware I write and maintain. Hopefully you can use this and it protects your T-Beam. It has space for the F550 battery and holds it in…
The F-91W has a 10 year battery, but a 3 year strap Print strap parts face down, and strap retainer upright. TPU filament required for its bendiness. You can print without supports, but you may need to adjust bridging angle. Does not…
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Decor Filament Drawer is a great way to record and…
Post of my Make of the Elipson Go1Wolf RC Plane. Hello Nick. We don't have our model there but I can give you authorization to upload the model there if you want. In the description you can put something like "This model has been designed…
Watch strap adaptor for 20mm nato straps. Print orientation shown in picture, bottom layer faces down when assembled onto watch. No supports needed, recommended to print at 0.12 to 0.24 mm resolution with 3 walls minimum. Preferably…
100% infill based off this: https://cults3d.com/en/3d-model/jewelry/casio-f91w-keyring-adapter
Just a simple clip to attach a Casio F91W to a molle loop or any other strap it fits on. I suggest printing it with PETG or ASA since it'll just snap if printed out of PLA. Kind of a pain to print due to low bed adhesion. It's strong…
For MacBook Pro 14 inches 2023, 96W USB‐C - MagSafe power adapter Added versions : 61w - 67w - 70w - 140w
I present a mount model for attaching a Casio F-91W watch to a bicycle handlebar.
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Modular System is a 3D printable storage solution…
NEW VERSION: MODULITH 115 GRIDFINITY DECOR DRAWERS These drawers have been redesigned and re-released as part of MODULITH (formerly GEN2). The new page has 12 sizes (1W to 4W in 1H, 1.5H and 2H), a half-grid side channel, optional magnet…
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Decor Filament Drawer is a great way to record and…
Here is a new slim basic case for the T-Beam 1watt with easy access to all the buttons. Designed for using a USB-C rechargeable F550 battery. This is a work in progress! I used tree support everywhere. Added a hexagon cutout to the front…
This is a desktop stand for Casio F-91W watch. When we are looking at the watch from different angles, sometimes it can be hard to see. With rotatable stand we can easily adjust the position so it's more easy and comfortable to see. You…
About This design allows you to mount a Dell docking station (WD15, WD19 or WD22) to a Dell P3421W monitor. You can either use no additional hardware or the official Dell Docking Station Mounting Kit to do so. BOM (Always) For the…
New added some new rev files that should allow for stacking of support electronics using standoffs between layers, and slimmer rak 3401 mount and a clip to hold the antenna on tight. 4/26/26 Mounting brackets for electrical enclosures…
This kit is a repair kit and strap conversion adapter for the CASIO F-91W. It solves the Achilles' heel of the F-91W, the belt durability problem. This adapter is compatible with 22mm NATO belts. The watch body can be attached with a…
UPDATE: Reworked also to fit the F-91W. Print Setting Material: TPU Layer Height: 0.20mm I printed with Overture High Speed TPU 95A.
Parametric strap loop replacement. The Stl provided is for the popular CASIO F-91W. You can modify the provided Freecad Spreadsheet to suit your needs. Parameter description default InnerHeight Inner heigth 5 InnerWidth Inner Width 17…
Feedback and mod in action: Link to tweet with videos and pictures. https://twitter.com/cOoLm0Dz/status/1771626287720763579 OP1we base fixed dimensions and accuracy.stl is the currently working one OP1we base (bottom what ever you call…
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Filament Drawer is a great way to record and…
Designed for vertical use Printed with Prusament PLA Prusa Galaxy Black Layer height 0.2mm on Prusa MK4
A replacement buckle for the Casio F-91W watch
I made this model from physical measurements I took. It is as accurate as my harbor freight digital calipers are. The model is based on FA2-16/1WEK but I have Z2S2416 also, and the only difference is that the heatsink covers more area and…
Protective case for the iconic Casio F-91W. This model is designed as a custom outer cover for the Casio F-91W digital watch series. It adds an extra layer of protection while preserving the simple and classic look of the watch.…
This is my second iteration of a replacement wristband for the above mentioned Casio watches and probably others. In this configuration its not suited for large wrists. The wrist on the Photo has about 20cm circumference and uses the…
The version for the 87W USB-C power adapter can be found here The power adapter of my new MacBook Pro was scratched very quickly after buying it, and i don't like scratched stuff... So i designed a cover for it, and my second power…
This was heavily inspired from @BerserkerJake_403397 and @Diode663_1505648 rugged Meshtastic/Meshcore case models. The main body in their design was originally centered around a water resistant plug and I find it a bit optimistic in a 3D…
I wasted all day on this lol. UPDATE: I WASTED 2 DAYS ON THIS. NOW COMES WITH SNAPBANDS! Print in any colour and customize your look! "Inspired" by the RoyalPop but with zero design skills. Works and fits great. Suitable for use as a…
This insert is specifically for the WaveShare Solar Power Manager (D) and RAK Wisblock (compatible with 1w) to be used with the 100mm x 100mm x 90mm junction box. The base that holds the batteries replaces the insert that comes with the…
A simple, but effective wall mount for the Dell Pro KM5221W Mouse (the set that comes with nearly every Optiplex)
During the first use of my LilyGo T-Beam 1W, the "locking pin" on the my original battery tray broke - thus not retaining the battery anymore. So I redesigned the tray to be the full length of a battery and added two additional locking…
A Brio 100 raiser for DELL monitor P3421W, so that it will not block part of thin bezel creating a notch. See pictures. Print with left side or right side (the t shape side) facing down so you will not need any support. The original…
Introduced to the concept of a one-way bearing when watching another great video by Robery Murray Smith and decided to create a 3d printed version and then once I had basic design wanted to see if I could incorporate it into a small winch…
This is a clip to keep the IPX antenna connector from coming off during mounting and movement of your node.
This is my attempt at a very small case for the Femtofox Meshtastic node. More information on the Femtofox can be found here: https://github.com/femtofox/femtofox Some notes: Additional Components: N Female to IPX/UFL RG178 Cable - 10 cm…
A simple, but effective wall mount for the Dell Pro KM5221W (the set that comes with nearly every Optiplex)
I did some quick modelling while waiting for the JetKVM Kickstarter campaign to end. Using their provided JetKVM 3D Model , I designed this 1W little sled that will hopefully fit the real thing. It is compatible with MartinRowan's…
Nice little camera holder for the HDZero Freestyle VTX to hold camera and included antenna. Prints out of PLA+/Tough PLA, PETG, ABS or TPU. I would not print out of standard PLA just because it may be too brittle for the screws to thread…
We are excited to share our latest Ignite Squishy Hexagon designs in both 1mm & 4mm versions. These hexagons are the same 3" size as our Ignite Foam Grip Tape sold @ 1wheelparts.com. We encourage you to play around with all the different…
If you have a bike and an old Casio F91W. If you love the idea to have a watch on your bike. So this model is for you ! Hope you enjoy this model as more as I enjoy it :) Feel free to comment to improve this model !
This design is inteded to improve the original white paper spreader from the Casio F-91W. Print in a translucent filament you can optionally preform the Reflective LCD mod shown here :
Attach the WisMesh starter kit to the front, two 18650 cells to the back, and slide it in to a 2" ABS pipe to get a weatherproof node you can easily mount anywhere! BOM: About 12cm of 2" ABS pipe 2" ABS cap hub with a 5/8" hole drilled…
The buckle of my watch strap broke, so I designed a replacement. Print with lowest possible layer height for better results.
I remixed jm3000 design to remove the holes to just a flat plate mount and added simple wording
Casio F-91W Watch Bar Mount – Fits 22.5 mm Handlebars Mount your trusty Casio F-91W exactly where you need it. This simple, sturdy bar mount holds a Casio F-91W watch securely on any 22.5 mm bar — perfect for bike handlebars, a desk…
Only 35mm handlebars. As I dislike wearing a watch, and yet want to keep time, I designed a mount for a Casio F91W watch. It replaces the strap and mounts using rubberbands that are regularly used by a famous bike computer manufacturer.…
This is an adapter to attach a Casio F-91W watch to a Fitbit Air wristband . The Fitbit is then worn on the underside of the wrist. Note that this works better if you don't have a small wrist. If your wrist is too small the end of the…
This is a case for the rak wismesh 1w booster kit. It houses the RAK3401, RAK13302, and RAK19007 boards. It has spots for a GPS antenna for an optional RAK12501. It has spots to put the BLE and the LORA antennas that come with the kit. It…
This is a variant of the RAKwireless Outdoor Enclosure for WisBlock enclosure , adapted for the WisMesh 1W Booster Starter Kit . The main changes are more space for a larger battery holes on the mounting plate for mounting a small…
Made possible by using the amazing https://www.printables.com/model/716558-multiconnect-generic-connector-for-your-board by David D Te used with the www.multiboard.io system. It holds on the board using the amazing MultiConnect by David D…
This is for the small cheap speakers sold as "notebook/tablet speakers" - they sound better in a small enclosure. The lid has space for the sticker to attach to and it friction fits to the back section. The oval speaker dimensions are…
I remixed @Petri_50013's design because my antenna did not fit. It is recommended to print the caps in TPU so they snap in easily.
I created this model because I needed to mount a camera to some industrial warehouse storage racks. Mounting to the wall was not an option, so this was the next best choice. It is designed to fit into the teardrop looking holes on the…
Morserino M32 Pocket prototype case (differs from the QRP Labs production version)
The fischertechnik solar power modules like this one (2V x 200mA = 0.4W) are often too weak under non-ideal conditions to do anything meaningful with them. This is an alternative more powerful 1W module (6V x 166mA). You can easily chain…
I had a beloved watch whose band snapped while I was working, so instead of buying a new one, I 3D-printed a replacement. What's innovative about this band is that it enhances breathability by exposing the gyro mesh structure. When I…
Created using the Reality Scan Android app and Onshape - it's not perfect but it fits and works essentially as well as the standard part. The mod is fully reversible and requires only a PH1 driver to move the existing screws over to the…
Convertor for Molex 150l 16 pin thats used on onewheel controller to XT60. It also has holder for rESCue stepdown - https://rescue.company.site/products/rESCue-DC-DC-converter-p418590804 and optional hole for neopixel wires. For better…
About I'm calling this the RAKshare. A bracket for the RAK Unify 180x130x60mm enclosure to mount: RAK 1W booster 19007 / 3401 / 13302 board. Waveshare Solar Power Manager (D). Adafruit INA3221 STEMMA QT board for power monitoring.…
I created this model in order to be able to fit 21700 battery with WisMesh RAK booster 1 watt. There's a button at the bottom, it's name is SS12D00, can be found on AliExpress. You also need an ipex to SMA cable about 5 cm. The battery is…
I was disappointed of the Mounting of my Sanlight Q1W Growlight. Made my own version to mount it on the ceiling to shine on my living green wall. You need 2xBolts M4 with nuts to connect the two brackets. 2 wood screws 4,5mm to mount it…
A simple and sturdy mount for a Casio F-91w / F-84w / F-105w to sit on your bike's handlebars! Can be installed using a zip-tie, or with an M4 x 30 bolt and nut. It may also fit an M4 x 25 bolt. ABS would be the best, though black PETG…
Print it yourself or order from Shapeways ! Drop - in replacement lid for the orangeRx UHF (openLRSng) 1W JR case lid. This changes the 'stick out' SMA connector on the factory case lid for one that is parallel to the case, reducing the…
The DRV-A601W Kenwood dashcam mount is no longer available. (Part #L4U-QEBY-CK) This adapter increases the size of the included ball mount so that it will work with this cheap, generic suction mount available on Amazon.…
Ultra-compact and fully printable snap-lock case for the Sipeed M1/M1w Dan Dock dev board (MAIX RISC-V 64 / Kendryte K210 board). It makes it look like a minimalist point&shoot camera, case is only 18 grams (0.7 oz) and assembled…
case for casio f-91w wanna make it lookalike dw5600 but i can't (lol) Material: PLA, PETG, or ABS (ABS is stronger, and more heat resistant). Layer Height: 0.12 mm or lower is highly recommended to capture the geometric lines cleanly.…
Digiscoping Adapter: Samsung A3 to Kowa TE-11WZ Adapter holds smartphone tighly while allowing use of all controls and camera. Fits tighly over Kowa TE-11WZ eyepiece (typically used with TSN-883 or TSN-884 scope) for digiscoping. Loop for…
Halterung, um die Panasonic Munddusche ohne zu bohren mit Silikon an einer Fliese zu befestigen.
I like to keep my rings near my watch, but never quite liked just "setting" the watch on top of a catch-all. This is a pretty simple tray that is sized for a partially-clasped Casio F-91W. Likely to fit similarly sized watches too (I hope…
Extremely quick and dirty modification of 1W faceplates to fit on any drawer position, instead of only 1W drawers. Also a handle with a hole in it, in case you want to use something else as the handle. The .5H / 1W accents can be used as…
A holder for the Tradfri light switch that can be placed on the Jung light switch. The bracket can be used with normal, series and double light switches. Inside the cover is a 10x5mm neodym magnet. Switch:…
Držák pro Tuya měřič hladiny (Tuya, ME201WZ, ZigBee). Existující uchycení měřiče slouží zeshora na nádobu, tedy např. IBC nádrž. Ovšem pokud řešíte problém uchycení uvnitř nádrže, například zespod na strop, proto jsem připravil tyto…
Have you ever wonder how many time you have before you are late during commune? Have you ever wearing a watch but you don't want to slow down and pull up your sleeve to check time? Have you mounted your watch on your side bar but it…
Meet Mesh-Link 30 and 30S, a Meshtastic/Meshcore solar or battery/USB powered long range node, with support for a 107mm x 61mm solar panel, an 18650 battery holder and a RAK 19007 wisblock board with a RAK 13302 Lora Boost module. This…
I took the existing rak 1w case and modified it to use flange-mounted USB-C jacks (w/onboard 5.1k resistors) I had on hand, with captive locknuts, rather than the full USB-PD trigger board the original used.
Bike handlebar mount to fit the cheap Go Outdoors Eurohike 1W hardtorch. This should fit handlebars around 32 mm. Feed the tiewraps from the bracket trough the mount plate and back. Click the plate in to the back of the head torch. I…
Pasacable MSX Panasonic, FS-A1WX, FS-A1WSX, FS-A1GT , FS-A1ST, para cuando cambias el transformador por uno a 220v y necesitas poner un cable nuevo
Recommend printing with wahoo adaptor facing up and with supports (including under the mount see picture) and a brim. I printed it with 100% infill tho less infill probably works.
This is a remix of David H. Brown's " Dehydrator Tray Extension for Commercial Chef CCD100W6 (formerly Westinghouse WFD100W) ". It is designed as a single piece extension tray for the somewhat larger Westinghouse WFD101W model dehydrator…
This is a 3D printable replacement for the AEG/Electrolux A1WYHSK2 stacking kit with pull-out shelf . The original kit has two small plastic locking pieces at the front that keep the dryer safely secured on top of the washing machine.…
I wanted a case for my T-Beam 1W which was more compact and less chunky than the others. While this doesn't provide waterproofing it does provide protection from the PCB and accidentally bumping the power switch. The tolerances were based…
This is a CPL filter mount for the blueskysea B1W dashcam. This mount press fits into the lens housing of the b1w with just your hands, the cpl filter also press fits inside. No glue, no mess. You will need the CPL filter for the A119…
3D printable alignment tool for the multifunction switch / transmission range sensor used on Aisin TF60SN and VW 09G family automatic transmissions. Also most Mini R5x models Compatible with transmission families commonly referenced as:…
This remix modifies the design for use with the Happymodel ES24TX Pro 1W ELRS module. The original version of this case was designed for the older non "Pro" 1W version. This is designed to replace the original main body of the module to…
Mounting bracket for clothes rack, metal coat rack “SONGMICS RDR001W02”, Spare part Printed in PETG, here even in night glow.
This is a adaption on the Gen2 drawer to allow for front loading of objects that one would not want in a drawer. I was this to store items I want quick access to or won't necessarily work in drawer. For example I use this to store my…
Checkout my enclosure and accessory collection for RAKwireless WisBlock, WisMesh Meshtastic and MeshCore devices ==> RAKwireless Origins . All my models come with STEP files and Fusion 360 project files for customization.…
I wanted a dual faced watch like Ripley in Alien. Original prototype was cloth and worn for about a year. I find the watch wraps around the wrist nicely, as is convenient to let both watch faces on different modes (i.e. Time/Stopwatch or…
This is a mount for a 1w-3w LED light and lens. It was originally designed for use in my Haunted Mansion face that follows you effect. Parts List... Lens (Qty 2) M3 x 10mm Cap Screws Check out our Wiki for more details on other Halloween…
Climate sensor bracket that takes minutes to print. Made it so you dont need to use doublesided tape on the sensor itself. Clip in place. Used filament: PLA Supports: Organic Printer: Ender 3 Max Neo
I had an issue where the cheap aftermarket LED bulbs i was using were too long for the housing to fit in my Accord Euro and i didn't want to get new ones, it might fit other Honda models using the same W21W/7440 or W21/5W/7443 bulbs, so…
This model is designed for the William Optics RedCat 71WIFD telescope to minimize the overall size. The telescope, with the focuser attached, fits completely into the original carrying case. Additionally, the gear ratio 2:1 requires a…
Hitachi TKR-6701W boombox frequency indicator I've made for restoration project, can work for other models of this era. Cheers!
This is designed to hold a Casio watch after the watch bands have been removed. To keep it from falling out I simply used a soldering iron and some thin strips of filament.
Linterna Ewtto 1W . tapa delante
