Sipeed M1w (Dan Dock) Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ultra-compact and fully printable snap-lock case for the Sipeed M1/M1w Dan Dock dev board (MAIX RISC-V 64 / Kendryte…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Ultra-compact and fully printable snap-lock case for the Sipeed M1/M1w Dan Dock dev board (MAIX RISC-V 64 / Kendryte K210 board).
It makes it look like a minimalist point&shoot camera, case is only 18 grams (0.7 oz) and assembled dimensions are 48mm x 70mm x 15mm.
Print instructions: 200 micron layer or less, non-transparent filament (to prevent LCD backlight leak)
More details in the video: https://www.youtube.com/watch?v=PEwpwvq5g1s
Note: make sure to tuck the antenna under the PCB (not in between PCB and LCD like implied in the video).
Print instructions
Category: Electronics Summary
Ultra-compact and fully printable snap-lock case for the Sipeed M1/M1w Dan Dock dev board (MAIX RISC-V 64 / Kendryte K210 board).
It makes it look like a minimalist point&shoot camera, case is only 18 grams (0.7 oz) and assembled dimensions are 48mm x 70mm x 15mm.
Print instructions: 200 micron layer or less, non-transparent filament (to prevent LCD backlight leak)
More details in the video: https://www.youtube.com/watch?v=PEwpwvq5g1s
Note: make sure to tuck the antenna under the PCB (not in between PCB and LCD like implied in the video).