Portland Trail Blazers Poker Card Capper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a weighted poker card capper. Placed it on your hole cards during a hand so they are not accidentally folded.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly on your chips when not in use.
This design is the Portland Trail Blazers logo that was updated in 2017.
If you like this model please checkout my Collection of Card Cappers Designs.
Printing
Print the logo file twice. Make sure you print it with the tabs up.
I printed the holder (upside down) and base with line support material spaced at 4.5mm.
Assembly
The holder is designed to have 4 nickels placed inside of it as ballast prior to assembly.
The four pieces will slide/snap together.
Put a little adhesive in the slots in the base before pressing the two logo pieces into the base. The holder should snap in and stay, but I use a little adhesive just to make sure.
*Enjoy and if you print one please post a picture!*