Dehydrator Mesh Tray remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dehydrator Mesh Tray for Silvercrest SDA 350 A2 or similar remix
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 113
- Wydruki
- 2
- Wyświetlenia
- 703
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Built a Silvercrest extension and needed mesh trays to dry silicagel. Found this , this and that , sadly their great work didn't fully suit my needs. I took Dull Soldering's Fusion 360 file and remixed it:
Now fits between Silvercrest mesh levels - 2 or more mesh levels with 4 mesh trays each level can be used, filament and desiccant can be dried at the same time - and is stackable - 2 or more mesh trays can be stacked in the upper chamber and better storage possibility. 20 can go between the 5 mesh levels and 40 in upper chamber. Hope this remix will fit for you, too.
About 25 gram per unit and 1 hour print time. Printed in PETG , 0.4 nozzle, 0.3 layer height. Look at links above for more details about infill, modifiers and so on