Wire Retainers for Repeat Robotics Drive Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mod to keep the phase wires away from the motor bell on your pro's!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
These are a simple, lightweight part that slips onto the M2 screws that hold the gearbox of the repeat robotics drive pro. They prevent the wires from bending into the the motor bell. I prefer these over any structure on the chassis, as they move with the motor, so anything during combat that shifts the motor can't move the wires into the bell.
Step files included to import to your cad. If your mounting wraps around the gearbox, you will have to add a cutout for these.
There is a version for the 2006 and 2007 variants of the motor. I only have the 2006, and am awaiting confirmation from a friend that it works for the 2007.
I print mine from Polymaker HT-PLA-GF, but any material with some rigidity should do the trick.
0.12mm layer height
3 walls/top/bottom
15% infill
Print in the orientation shown in the pictures for maximum strength.
Support on the hoop may be needed depending on printer/material.