1 / 4
Volvo P1 (S40, V50, C30, C70) Handbrake Rear Cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement handbrake cap for P1 platform Volvos. The OE part is expensive so print this instead!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 168
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (20)Powiązane
I had to buy a replacement handbrake cover for my C30, so I thought I might as well model and print it as a challenge. Hopefully this saves someone from having to spend $18 on a tiny piece of plastic!
Obviously the toughest plastic you have on hand would be ideal. I'll probably try redesigning it later to make it stronger, but right now it's just a 1:1 copy of the injection molded part. Those clips are pretty thin!
Including a picture of the print orientation and support placement I used.