Face Plate for RecPro RV City Water Fill Inlet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Face Plate for RecPro RV City Water Fill Inlet - campervan or rv conversion
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I replaced the gravity fill inlet in my van with a new city water inlet, and needed a faceplate to cover the old larger hole.
This model is based on the RecPro RV City Water Fill Inlet (Amazon; not an affiliate link)
The hole is off-centered on purpose to fit my van, but I've included the OpenSCAD file so you can easily change it. Variables, in inches:
width: faceplate overall widthheight: faceplate overall heightthickness: faceplate thickness (default 1/8")radius: edge fillet radiushole_diameter: main hole diameter (sized slightly larger than the RecPro port by default)outer_diameter: outer diameter of the inlet's built-in face plate, used as a reference for the built-in mounting hole offsetshole_x: main hole horizontal offset (not centered by default)hole_y: main hole vertical offset (centered by default at height / 2)corner_hole_dia,countersink_dia, andcountersink_depth: corner mounting hole dimensions, sized for #8 wood screws