Face Plate for RecPro RV City Water Fill Inlet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Face Plate for RecPro RV City Water Fill Inlet - campervan or rv conversion
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
I replaced the gravity fill inlet in my van with a new city water inlet, and needed a faceplate to cover the old larger hole.
This model is based on the RecPro RV City Water Fill Inlet (Amazon; not an affiliate link)
The hole is off-centered on purpose to fit my van, but I've included the OpenSCAD file so you can easily change it. Variables, in inches:
width: faceplate overall widthheight: faceplate overall heightthickness: faceplate thickness (default 1/8")radius: edge fillet radiushole_diameter: main hole diameter (sized slightly larger than the RecPro port by default)outer_diameter: outer diameter of the inlet's built-in face plate, used as a reference for the built-in mounting hole offsetshole_x: main hole horizontal offset (not centered by default)hole_y: main hole vertical offset (centered by default at height / 2)corner_hole_dia,countersink_dia, andcountersink_depth: corner mounting hole dimensions, sized for #8 wood screws