A320 Style Pedestal Trash
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean trash bag holder that fits the standard Airbus style panels into the pedestal.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 02/04-2026: Added pictures for new filament, panchroma muted blue (previously polyterra army blue), and updated print settings.
After making my printer panel (see profile) I realised how much extra waste and paper gets made and so I decided to make this trash in the same style that most other panels are in an A320. It's made to fit the lower part of the pedestal with the same width as the WINCTRL products.
There're two print profiles you need to download, the standard 0.4mm nozzle and 0.2mm nozzle for better precision and quality on the handle and top panel. They can be printed with standard nozzle to but won't have the same quality.
I use eight 4*2mm round magnets to snap the lid on top.
One standard M3 heat insert and one M3 screw, approx 12mm to hold the handle.
For the bags I just use regular plastic freezing bags.
Print Instructions:
If there is a .3mf file it should have everything loaded in the correct way and with the correct settings. But you can double check all the settings anyway:
NOTE: Make sure in the filaments tab that the transparent filament is the first color or else the infill will merge in your object. Remove and add the blue filament if it still doesn't work. There are two print profiles, 0.2mm and 0.4mm nozzle. The top panel is printed with 0.2 for better quality on text.
I use two PLA filaments, Panchroma Muted Blue PLA filament and a standard white filament, nothing to specific.
When importing do not scale to millimeters and load as a single object with multiple parts.
Ironing Type - Topmost surface only on the top panel
Infill type - Rectilinear
Infill density - 100% for 0.2 nozzle, 45% for standard panels and 100% for knobs and handles
Layer height - 0.1 for top panels and knobs/handles and 0.15 for other panels.
Standard supports if there are overhang holes, they remove easily for me.
Make sure the ironing pattern goes from left to right of the panel, side to side. Orient it in the correct way and make sure all panels are oriented the same way. If you use OrcaSlicer or similar you can change the ironing angle.