G&G LevAR Quick Release Suppressor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick release suppressor for the G&G LevAR Airsoft Replica
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to add a suppressor to my G&G LevAR, and was inspired by the QR suppressor my son has for his VFC MP7.
I printed it using PETG-CF, because I liked the finish. It did add some challenges because of the snug fit of some of the parts, and had to do some sanding to make it work properly. I used M3 inserts and M3 screws for the outer ring of the quick release, and included a 5mm * 15mm spring.
Outer diameter of the suppressor is 42mm, inner diameter is 30.5mm.
I printed it using a 0.4mm nozzle and a 0.2mm layer height. I also used supports for the quick release mechanisms.