Strap Wrench for 5M-550-15 Timing Belt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a lawnmower strip and finally break its drive belt, which happened to be a 5M-550-15. Then I thought, why not…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I had a lawnmower strip and finally break its drive belt, which happened to be a 5M-550-15.
Then I thought, why not use it for a strap wrench which I had planned to buy eventually.
5M: pitch is HTD 5mm (High Torque Drive), meaning a rounded teeth design
550: is the length in mm. Any length will do really...
15: is the width of the belt, in mm
Voilà!
Covers are optional, and the fit for the fixed part of the belt is really snug and may need a few hammer strikes.
Picture is slightly different, as the CAD was updated following the print, according to what I thought could be improved. Let me know how it goes.
The design can be found (and edited) on OnShape with the name "Strap Wrench 5M-550-15" if you have a different type of belt you want to use.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Overture PLA Grey
Notes:
2mm sides and bottom/top for strength
Category: Hand Tools