1 / 4
Strap Wrench for 5M-550-15 Timing Belt — image 1
1 / 4

Strap Wrench for 5M-550-15 Timing Belt

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I had a lawnmower strip and finally break its drive belt, which happened to be a 5M-550-15. Then I thought, why not…

Rating
0 / 5
Likes
5
Downloads
40
Makes
0
Views
483
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

I had a lawnmower strip and finally break its drive belt, which happened to be a 5M-550-15.

Then I thought, why not use it for a strap wrench which I had planned to buy eventually.

5M: pitch is HTD 5mm (High Torque Drive), meaning a rounded teeth design

550: is the length in mm. Any length will do really...

15: is the width of the belt, in mm

Voilà!

Covers are optional, and the fit for the fixed part of the belt is really snug and may need a few hammer strikes.

Picture is slightly different, as the CAD was updated following the print, according to what I thought could be improved. Let me know how it goes.

The design can be found (and edited) on OnShape with the name "Strap Wrench 5M-550-15" if you have a different type of belt you want to use.

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Filament: Overture PLA Grey


Notes:

2mm sides and bottom/top for strength

Category: Hand Tools

Tags