no-support remix of BDM Frame Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full fusion recreation of two-part BDM Frame Support model to be a single piece and require zero supports
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Perfect BDM frame print design, but the original part has a tolerance issue requiring scaling one or the other. While the original file is split into two parts so the print orientation is optimized, I don't believe this will be holding any significant weight requiring this optimization so I remixed solely for ease of printing.
Removes the need for supports, both left and right side parts can fit on a smaller 200x200mm print bed, but otherwise is very nearly the same functional shape as the original.
The STL version is a single right-hand piece, flip it in the z-axis to make a left-hand side.
The 3MF file should have both left and right sides correctly oriented and laid flat on the print bed in the best orientation for printing without supports.