1 / 3
Mirror Mount Holder for Beeline Moto II - M10x1,25 (Husqvarna Vitpilen 401) — zdjęcie 1
1 / 3

Mirror Mount Holder for Beeline Moto II - M10x1,25 (Husqvarna Vitpilen 401)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mirror mount for Beeline Moto II with original adapter, designed for Husqvarna Vitpilen 401 (M10×1.25 mirror thread)

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
186
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This mount is designed to attach a Beeline Moto II using the original Beeline Moto Mount Adapter.

The holder was specifically designed for my Husqvarna Vitpilen 401. It screws directly into the left factory mirror mount on the handlebar. The mirror mount uses a standard M10 × 1.25 thread, which is common for motorcycle mirrors.

The design allows a clean and stable mounting position near the handlebar without the need for handlebar clamps or additional adapters.

The Beeline Moto Mount Adapter is attached to the printed part using an ultra-flat M3 × 6 Torx screw. The screw threads into a hex nut that is embedded in the print, making assembly easy and secure.

Hardware Required
  • Original Beeline Moto mount adapter

  • M3 × 6 flat head Torx screw

  • DIN 934 M3 hex nut (embedded during printing)

  • DIN 912 M10x1,25 x 35mm socket head cap screw

Features
  • Designed for Beeline Moto II

  • Compatible with the original Beeline Moto Mount Adapter

  • Mounts directly into the mirror thread

  • Clean cockpit integration

  • Embedded nut for secure mounting

  • Compact and lightweight design

Print Settings

Recommended settings

  • Layer height: 0.2 mm

  • Infill: 15 %

  • Perimeters: 3

  • Supports: Required

Recommended materials

  • PETG 

  • ASA / ABS for higher heat resistance

PLA may soften or deform when exposed to direct sunlight or high temperatures on a motorcycle.

Important Printing Notes

Please pay attention to the model orientation and support settings when slicing.

  • The model should be oriented so that the surface for the Beeline Moto Mount Adapter faces the build plate.

  • Supports must be enabled for the print.

  • Use paint-on supports to avoid generating supports inside the cavity for the M3 hex nut.

To embed the nut:

  1. Start the print normally.

  2. Set a pause at 10 mm print height.

  3. Insert the M3 hex nut into the designated cavity.

  4. Resume the print so the nut becomes fully enclosed in the part.

This ensures a secure and clean mounting point for the adapter screw.

More pictures comming soon!

Tagi