Mirror Mount Holder for Beeline Moto II - M10x1,25 (Husqvarna Vitpilen 401)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mirror mount for Beeline Moto II with original adapter, designed for Husqvarna Vitpilen 401 (M10×1.25 mirror thread)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This mount is designed to attach a Beeline Moto II using the original Beeline Moto Mount Adapter.
The holder was specifically designed for my Husqvarna Vitpilen 401. It screws directly into the left factory mirror mount on the handlebar. The mirror mount uses a standard M10 × 1.25 thread, which is common for motorcycle mirrors.
The design allows a clean and stable mounting position near the handlebar without the need for handlebar clamps or additional adapters.
The Beeline Moto Mount Adapter is attached to the printed part using an ultra-flat M3 × 6 Torx screw. The screw threads into a hex nut that is embedded in the print, making assembly easy and secure.
Hardware Required
Original Beeline Moto mount adapter
M3 × 6 flat head Torx screw
DIN 934 M3 hex nut (embedded during printing)
DIN 912 M10x1,25 x 35mm socket head cap screw
Features
Designed for Beeline Moto II
Compatible with the original Beeline Moto Mount Adapter
Mounts directly into the mirror thread
Clean cockpit integration
Embedded nut for secure mounting
Compact and lightweight design
Print Settings
Recommended settings
Layer height: 0.2 mm
Infill: 15 %
Perimeters: 3
Supports: Required
Recommended materials
PETG
ASA / ABS for higher heat resistance
PLA may soften or deform when exposed to direct sunlight or high temperatures on a motorcycle.
Important Printing Notes
Please pay attention to the model orientation and support settings when slicing.
The model should be oriented so that the surface for the Beeline Moto Mount Adapter faces the build plate.
Supports must be enabled for the print.
Use paint-on supports to avoid generating supports inside the cavity for the M3 hex nut.
To embed the nut:
Start the print normally.
Set a pause at 10 mm print height.
Insert the M3 hex nut into the designated cavity.
Resume the print so the nut becomes fully enclosed in the part.
This ensures a secure and clean mounting point for the adapter screw.
More pictures comming soon!