Counting matching models…
A basic clip for a Beeline Moto 2, which (supposedly) fits Velo 2 as well. Modify as reqired, F3D included… I didnt spend a gross amount of time doing it and it was done to best print on my printer which isnt tuned in the best. But i have…
I did not like the mounts available and the position of the device so I designed my own. The device now sits on the right side between the bar and the brake fluid reservoir. Additionally required are two M3 Screws and one nut . The small…
After 1 year, the original Beeline Moto GPS holder cracked (see photo). Therefore I designed a stronger holder (I hope) to replace it. Content Beeline - Original - Clip v1.0 : Clip to block Beeline GPS Beeline - Original - Holder v1.0.stl…
I recommend printing it with tree support as normal support is hard to remove. I used XPETG-CF with a layer height of 0.16mm. Higher layers tend not to fit the Beeline.
A friend needed a slim adapter for his SP-Connect Moto mount. I used his original parts and made an adapter for the Beeline Moto 2. You need parts from the SP-Connect to make this work and also optionally a shorter M5x8 or M5x10 stainless…
Store your Beeline Moto 2 under your motorcycle seat when not in use. I included multiple logo .stl with various offsets (from 0.1 mm to 0.4mm) Fusion 360 file included if you want to adjust the thread tolerance or anything else.
Small and neat storage case for the Beeline Moto II GPS. The pictures show the version with 0.16mm layerheight, 5 walls and 50% infill for maximum strength (and because i like the heavy and robust feeling of it). The Thread is a bit tight…
I needed a solid mount for my Beeline to mount on the bars of my Triumph. Bought the Garmin “out front” mount and then realised it didn't fit the 25mm bars. Oops, so I printed this with PETG. You will need 2 of 35mm M4 plus nuts to close…
This is an adapter to mount your Beeline Moto 1 to the 22mm handlebars of your motorcycle. Designed this for my BMW R60/5 but may well fit other bikes of similar vintage. STEP files provided so you may easily modify it to suit your needs.…
I design this cover to hide my beeline support when I remove the device :) You can also add a logo from your motorbike if you want! I put my 701 vitpilen on it ;P Enjoy!
Accessories provided by Beeline with its GPS does not adapt to my motorcycle which is Yamaha Tracer 700 (or Tracer 7). I tried for 1 year with a short shelf bracket however holder has been cracked. Therefore I designed a part who links…
Les comparto mi archivo STL del BEELINE MOTO 2. El modelo tiene una visera para el sol, no tiene orificio para la entrada USB; prefiero que no se moje si llueve. El modelo queda justo, así que no se va a salir. I am sharing my STL file of…
30 mm handlebar mount for Beeline Velo 2 “bike computer”. What you need: Two M3x5 screw inserts Two M3x8 screws for assembly One M3x12 screw for hinge Inner diameter of the handlebar part is 32 mm, you can fit little rubber bit on the…
I recently bought a Beeline navigation device for my motorcycle. The mounting option for my type of motorcycle were either limited location wise, or bulky and ugly otherwise. So I decided to create my own option. In the cockpit attached…
Case for your Beeline Velo 2. There is two versions : 1mm et 2mm wall. It's design to be print with TPU. A cover for the screen is coming.
Print both files in the desired color. Take one of the shorter bands in the Beeline Velo 2 box and use this to securely close this case.
This design mounts a Beeline 2 GPS beside the speedometer of a Fantic Caballero. It's printed in 3 parts. The holder fastens to the clamp with an M3 screw and nut, and the clamp fits round the bike's ignition switch, tightened by a 25 mm…
Le hice un pequeño visor o capucha para que se pueda ver mejor con la luz del sol
Beeline Moto 2 holder for Vespa wind shield. Rubber was printed from TPU 95A, 0.2mm layer height Plastic parts were printed from Prusament ASA, 0.15 layer height Non printable parts: 3x M4 nuts 2x M4x20 screws 1x M4x12
Yamaha XSR700 Beeline Moto 2 Mount - Clean Navigation Setup A simple, no-fuss mount designed specifically for putting your Beeline Moto 2 on the XSR700's dash. This thing keeps the clean look of the bike while giving you a solid spot for…
I wasn't a fan of the rubber-band handlebar mount solution. It works, but it feels a tad cheap considering the cost of the Beeline. I also wanted to use the charging adaptor so I don't need to worry about battery level. This print better…
I made a simple case for my Moto 1 because the original one from Beeline was not exactly what i wanted(too big and bulky). Your Moto 1 fits perfectly inside, no shaking or scratching, even with a separate display cover. Print with PLA or…
Beeline Moto II Case – Custom Version I printed this Beeline Moto II case starting from the original Beeline Moto II Case v2 project by Mo_Karacho on MakerWorld. For my version, I added the Beeline logo to the top of the case ,…
Simple and pratical Beeline Moto II case
This is an improved version of my ‘Beeline Moto 2 GPS Mount for Fantic Caballero’. The body is now a printed in one piece for better rigidity, and it now uses an official adapter from Beeline to accept the bayonet fitting, giving a…
I replaced the clock with a beeline. the clip is from a bar handle, but can also be printed. The wall at the upper part is very thin, so print carefully. lower and ubber part as well as clip can uses m4 thread nuts to connect. i used some…
Holder for Beeline Moto 2 for Kawasaki Versys 650 2022+ Printing profile: Material: ABS/ASA (preffered) or PETG Settings: 0.12 or 0.16mm 5 perimeters/walls 40% infill - no supports, no brim Hardware needed: 5x M3 Heatset inserts - Voron…
Beeline Moto, Moto II - holder for SKADIS IKEA
I replaced the clock with a beeline. the clip is from a bar handle, but can also be printed. you need the clocks mount to hold the beeline mount in place. The original seal from the beeline can be reused. Since the beeline is completely…
Moto BeeLine II - Casing + Inlay For the BeeLine II (moto navigation) I created this Rugged Box with TPU inlay. For the box design I used the model of @Whity (so all the credits to this maker for that aspect!). For the inlay I created a…
Designed to be printed in the uploaded orientation, and requiring 4x M3 heat set nuts and M3 x 8 bolts. The actual snap-fit clip for the GPS is part of its standard installation kit.
Bike mount for the Beeline Velo 2 in 3 parts, minimalist design. I used M3 bolts for the assembly.
Halterung für den Fahrradlenker für das Navigationsgerät Velo 2 von Beeline. Konstruiert in zwei Teilen (ober- und Unterteil. zur Verbindung werden zwei M3 Schrauben mit Muttern benötigt. Ich habe damit es am Lenker nicht verrutscht einen…
This mount is designed to attach a Beeline Moto II using the original Beeline Moto Mount Adapter . The holder was specifically designed for my Husqvarna Vitpilen 401 . It screws directly into the left factory mirror mount on the…
Adapter to install Beeline Moto II GPS unit with power insert on my Beachman 64 bike leveraging Beeline's AMPS mount
The plastic top piece on my Beeline Moto II Powered Mount Insert (the charging insert with the two pogo pins) cracked through the centre screw boss. There was no model of that piece anywhere, so I measured the original and made a…
This mount is designed to attach a Beeline Moto II using the original Beeline Moto Mount Adapter . The holder was specifically designed for my Husqvarna Vitpilen 401 . It screws directly into the left factory mirror mount on the…
Beeline Moto 2 holder for Vespa wind shield. Rubber was printed from TPU 95A, 0.2mm layer height Plastic parts were printed from Prusament ASA, 0.15 layer height Non printable parts: 3x M4 nuts 2x M4x20 screws 1x M4x12
Adapter to install Beeline Moto II GPS unit with power insert on my Beachman 64 bike leveraging Beeline's AMPS mount
maybe later i do more models for many more tubes measures. this model is “for tube 32mm”. i use this base for my bike. I recomend print with PET-G
![Beeline Moto II [BLACK] - Casing + Inlay](https://media.printables.com/media/prints/f9177b1b-4ec9-47f9-b156-eb26eb1c75bb/images/11731374_9dc9fdd0-2aa5-4f53-b760-d384626585e9_644259ed-2c8b-42ec-a31b-00a0d0e15c65/motobeelineii_inlay.jpg)
