1 / 4
Kawasaki Versys 650 2022+ Beeline Moto 2 holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kawasaki Versys 650 2022+ Beeline Moto 2 holder
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Holder for Beeline Moto 2 for Kawasaki Versys 650 2022+
Printing profile:
Material: ABS/ASA (preffered) or PETG
Settings: 0.12 or 0.16mm 5 perimeters/walls 40% infill - no supports, no brim
Hardware needed:
- 5x M3 Heatset inserts - Voron type 5x4x3
- 3x M3x8 socket bolts
- 2x M3x20 socket bolts
- Electrical tape
Build:
- Use soldering iron to install heatset inserts as on pictures
- Wrap the “smart bar” on the motorcycle with small amount of electrical tape to protect the paint
- Install bracket using 2x M3x20 and 1x M3x8 bolts
- Make sure you like the angle before screwing fully
- The small gap between parts is by design
- Screw in the holder disc
- Install Belline Moto 2 as usual
- You can use two grooves to strap the charging USBC cable using cable ties