1 / 1
UNO Show 'em No Mercy – 3-Slot Tin Insert — zdjęcie 1

UNO Show 'em No Mercy – 3-Slot Tin Insert

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial

This is a custom-designed organizer for the UNO Show 'em No Mercy tin. The original packaging often struggles to keep the massive deck especially if you have an expansion pack. This insert splits the deck into three manageable stacks and provides dedicated space for the expansion tokens.

Features

  • Three-Slot Design: Specifically measured to fit the "No Mercy" deck height.

  • Expansion Ready: Large enough to accommodate the base game plus expansion cards.

  • Token Storage: Front-facing slots to keep your tokens from rattling around at the bottom of the tin.

  • Finger Notches: Deep cutouts on the sides for easy card retrieval—no more digging for the last card.

Print Settings

This was designed to be a "set it and forget it" print. No complex bridges or overhangs.

  • Nozzle: 0.4mm

  • Supports: None (designed for support-free printing)

  • Material: PLA

Notes

This insert fits snugly into the standard red collectors' tin. If your tin has a slightly different internal dimension, you may want to scale it by 1-2% in your slicer, but at 100% scale, it should drop right in. The model is 210mm X 148 mm X 22mm

Tagi