Beer line bracket for Lindr AS-80
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket holds my beer lines in place and prevents kinking. The beer flows through a coil in a cold water bath…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This bracket holds my beer lines in place and prevents kinking.
The beer flows through a coil in a cold water bath from left to right. The thicker tubes are a loop to cool the black insulated python hose so the beer stays cool on its way to the tap.
The python hose is heavy, so I didn't want it to hang from the lines. I used hot water to bend the tubes so they pointed downwards.
This fits a Lindr AS-80. It might also fit other models. I included the Freecad file so you can adapt it if needed.
It took a long time to print. Can probably be optimized to use less material if someone wants to remix it.
The fitting for the cool water return line is a John Guest PI1216S.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
Gyroid 2mm
Filament: FormFutura PETG HDGlass
Category: DIY