Beer line bracket for Lindr AS-80
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bracket holds my beer lines in place and prevents kinking. The beer flows through a coil in a cold water bath…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 379
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This bracket holds my beer lines in place and prevents kinking.
The beer flows through a coil in a cold water bath from left to right. The thicker tubes are a loop to cool the black insulated python hose so the beer stays cool on its way to the tap.
The python hose is heavy, so I didn't want it to hang from the lines. I used hot water to bend the tubes so they pointed downwards.
This fits a Lindr AS-80. It might also fit other models. I included the Freecad file so you can adapt it if needed.
It took a long time to print. Can probably be optimized to use less material if someone wants to remix it.
The fitting for the cool water return line is a John Guest PI1216S.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
Gyroid 2mm
Filament: FormFutura PETG HDGlass
Category: DIY