Modular Filament Storage System Edited for 220mm and smaller printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Edited version of AWT Works modular filament storage system. Designed to fit on printers with 220mm max build area.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Edited the height of each module connector so they would fit into a 220mm build area printer. Ran into a slight issue of some filament spools being too tall to fit in-between the filament support rods. So I edited the filament support rods to have a notch as well.
For the specific area I had planned to use this system I could fit two full size storage systems. So I also included a shorter version of the notched rod. You can of course scale the standard rod down to 160mm to make it work as well.
All credit goes to AWT Works for their fantastic and functional design. Absolutely love it. Just edited a bit so it works well for me.