VEX V5 "rj11" cable holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket was designed to organize VEX V5 cables.There are 4 different sizes posted: 2x5, 2x10, 2x12, and 2x15.The…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket was designed to organize VEX V5 cables. There are 4 different sizes posted: 2x5, 2x10, 2x12, and 2x15. The rj11 plugs clip securely into each slot, protecting the ends of the cables. Brackets have indents on the side to help locate the slots when looking down from the back of the bracket Mounting holes are on inch spacing (to match US pegboard)
I envision 3 different configurations:
- 1 bracket with a single cable hanging from each port
- 1 bracket with a cable looped so that both ends are clipped in a slot
- 2 brackets (top and bottom) to keep both ends secure
This was designed for a little slop and works very well on the old Anycubic Chiron I printed them on (even with a 0.3 mm layer height).
Category: Hobby