IKEA SAMLA caster plate for RILL wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting plate for adding IKEA RILL caster wheels to an IKEA SAMLA storage box.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
The plate is designed to be glued to the bottom of the box. It provides a stable surface for mounting the wheels.
Features:
- 100 x 100 mm plate
- corner cutouts to fit into the rounded SAMLA corners
- 31.5 mm screw spacing for IKEA RILL wheels
- countersunk holes for M4 screws
- optional versions with adhesive grooves or smooth surface for double-sided tape
Printing:
PLA or PETG works well, PETG for heavier loads.
Example settings:
- 0.2 mm layer height
- 20% infill (higher for heavier boxes)
- 5 perimeters
Mounting:
Glue the plate to the bottom of the box (MS polymer adhesive works well).
Let the adhesive fully cure before installing the wheels.
Tip: Insert the screws during gluing and temporarily tighten them with nuts.
This prevents adhesive from getting into the screw holes and gluing the screws in place.
Use M4 screws about 10 mm long.
Maximum length is about 16 mm, but longer screws may slightly rub against the wheel housing and make the wheels harder to turn.