Flat Crank handle for Ratchet strap reel (clicky assembly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple to print and assemble variation of the crank for the Ratchet strap reel
- Ocena
- 5 / 5
- Polubienia
- 74
- Pobrania
- 234
- Wydruki
- 4
- Wyświetlenia
- 2035
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
The original crank is made out of three parts and they have to be assembled with a screw. This is overly complicated for a simple organizer AND it is quite bulky. In my case it wouldn't fit in the tiny compartment of my car with the original handle.
This new and very simple version the whole assembly is flatter and easier to print.
Parts to print for V1 (orange PETG in the picture)
Make sure to print the original parts:
- reel base.STL
- reel cover.STL
available here: https://www.printables.com/model/135585-ratchet-strap-reel-clicky-assembly-width-30mm/files
AND
- crankV1_remixed.stl
Parts to print for V2 (yellow PETG in the picture)
Make sure to print the original parts:
- V2 reel base.STL
- V2 reel cover.STL
- V2 crank.STL
available here: https://www.printables.com/model/135585-ratchet-strap-reel-clicky-assembly-width-30mm/files
AND
- crankV2_remixed.stl
BIGGER straps?
Not necessary anymore for V2
The original ratchet-strap-reel-thingi was a bit too small for my 5m heavy-duty strap. I printed the all the files with 120% size in x- and y-dimensions while leaving the z-dimension at 100%:
