1 / 2
Flat Crank handle for Ratchet strap reel (clicky assembly) — image 1
1 / 2

Flat Crank handle for Ratchet strap reel (clicky assembly)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple to print and assemble variation of the crank for the Ratchet strap reel

Rating
5 / 5
Likes
74
Downloads
234
Makes
4
Views
2,035
Reviews
3

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Public Domain

The original crank is made out of three parts and they have to be assembled with a screw. This is overly complicated for a simple organizer AND it is quite bulky. In my case it wouldn't fit in the tiny compartment of my car with the original handle.

This new and very simple version the whole assembly is flatter and easier to print.

 

Parts to print for V1 (orange PETG in the picture)

Make sure to print the original parts:

  • reel base.STL
  • reel cover.STL

available here: https://www.printables.com/model/135585-ratchet-strap-reel-clicky-assembly-width-30mm/files 

AND

  • crankV1_remixed.stl

Parts to print for V2 (yellow PETG in the picture)

Make sure to print the original parts:

  • V2 reel base.STL
  • V2 reel cover.STL
  • V2 crank.STL

available here: https://www.printables.com/model/135585-ratchet-strap-reel-clicky-assembly-width-30mm/files 

AND

  • crankV2_remixed.stl

BIGGER straps?

Not necessary anymore for V2

The original ratchet-strap-reel-thingi was a bit too small for my 5m heavy-duty strap. I printed the all the files with 120% size in x- and y-dimensions while leaving the z-dimension at 100%: