1 / 8
Boat handrail mount/mount for 25 mm/1 inch pipe -  including cup holder — zdjęcie 1
1 / 8

Boat handrail mount/mount for 25 mm/1 inch pipe - including cup holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount stuff on the handrails. For 25 mm/ 1 inch pipe (print the correct version). A cup holder is included.

Ocena
5 / 5
Polubienia
8
Pobrania
24
Wydruki
0
Wyświetlenia
171
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Mount stuff on the handrails. For 25 mm/ 1 inch pipe (print the correct version). A cup holder is included, so you can see how it is used. Choose cup holder for vertical or horizontal mounting. You could also integrate the inner part directly into a design (such as a cupholder, a STEP file is provided for this purpose).

Mounting holes are 16 mm apart. This is easy to modify using the included CAD files.

Use 2 M4 screws for mounting, and one M4 40 mm screw for clamping the mount (and nuts).

You can also use 8-32 screws. For clamping use the length 1-5/8" (it will be a bit too long).

To mount the cup holder which is included, you need M4 x 16 mm screws (and nuts).

Assembly (cup holder is assumed):

  1. Mount inner part to cup holder.
  2. Push outer part over 25 mm pipe
  3. Insert the inner part into the outer part.
  4. Fasten the clamping screw.

Category: Sport & Outdoors

Tagi