Horizontal spool holder with quick release and 4 x 608 bearings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Horizontal spool holder with fast release spool running on 4 x 608 bearings. 3 of the bearings can be printed if desired
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found three useful designs and merged them to become a 4 bearing horizontal spool holder with a quick release spool hub.
The hub is detachable from the base for ease of loading on a new spool.
The design uses 4 off 608 bearings and the 3 outer bearings can be printed if desired as the central hub bearing handles most of the load.
Print in the default orientation of each stl file with a 0.6mm nozzle and 0.3 layer height with 25% infill. Total print time is about 13 hours and uses about 240 g of plastic. PETG worked well for me.
I you use a 0.4mm nozzle it needs a 20mm layer height and will take 20 hours.
The base should be printed with normal supports and a support overhang angle of 67 degrees.