Horizontal spool holder with quick release and 4 x 608 bearings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Horizontal spool holder with fast release spool running on 4 x 608 bearings. 3 of the bearings can be printed if desired
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I found three useful designs and merged them to become a 4 bearing horizontal spool holder with a quick release spool hub.
The hub is detachable from the base for ease of loading on a new spool.
The design uses 4 off 608 bearings and the 3 outer bearings can be printed if desired as the central hub bearing handles most of the load.
Print in the default orientation of each stl file with a 0.6mm nozzle and 0.3 layer height with 25% infill. Total print time is about 13 hours and uses about 240 g of plastic. PETG worked well for me.
I you use a 0.4mm nozzle it needs a 20mm layer height and will take 20 hours.
The base should be printed with normal supports and a support overhang angle of 67 degrees.