Counting matching models…
This spinner was a personal challenge to come up with something that looked different from my other spinners. I also wanted to design something that printed quickly. On my Anycubic Kobra Pro 2, the spinner and caps only took 31 minutes to…
It's a tyre I adapted for a 608 bearing to a nicer look. It can be printed using any filament but best rendering with TPU.
I printed recently a tube for 608 bearings, I found on Marker World site. And I was frustrated to don't have similar tubes for the other bearing references I owned. So I completely redesigned several tubes to store my 625 and 606 bearings…
After realizing models of bearing tubes to store 606, 608 and 625 bearings https://www.printables.com/model/1316811-bearing-tubes-with-id-ring-for-606-608-and-625-bea I've been asked to create corresponding Gridfinity bins. Here there…
peli 1510 to 608 bearig adapter ali pu wheels.stl - for narrow PU wheels from aliexpress (0.75 wider spacer, instead pelican wheels) peli 1510 to 608 bearig adapter.stl - for regular pelican wheels
I needed something that could easily move to different positions along my filament line and could swivel so it was at the correct angle to provide the least amount of friction. This filament guide, when used with the Multipoint Rail…
A quick adapter to use common M3 screws to secure 608 bearings. Not as strong as using an 8mm bolt - but plenty secure for a lot of projects. Hardware needed: M3 x 25mm FHCS screw M3 nylon lock / nyloc nut Print as oriented. No supports…
This bearing kit contains detailed 3D printable bearing models for functional or visual use. Ideal for demonstrations, mechanical concepts and modeling. All bearings can be printed in one piece or as separate parts for smooth movement and…
About Very simple 3d printed bearing with few improvements to similar bearings I have seen. Improvements: Smallest tolerance I could do with PLA on Prusa Core One (0.1mm between inner and outer ring) Small bevel for easier mounting Making…
I added the K1 style slip ring, then rotated it to fit the Leote's Sidle panel. It should fit the all the side panels Leote has released for the K1 Family, but posting them all as remixes to show up on the earlier ones seems to me a…
These are plastic parts to hold up the T8 trapezoidal screws centered thanks to a 608ZZ ball bearing. These parts are suitable for version 2.01 of the p3steel frame and others if identical. Make sure of the shape of the metal parts.…
Remixed v4cascade's model of a V block with bearings to fit 608 size bearings. They should press into place.
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
EN Stand for large 5 kg filament spools. The print does not require supports. Final assembly is done by gluing the parts together with cyanoacrylate (Super Glue). Press 608ZZ bearings into the rollers. then insert the spacer sleeve from…
This model is compatible with the lego system.
Overview I designed this part to simplify the process of turning a standard SBR20 rail into a motorized linear actuator. Instead of designing a complex separate motor mount and idler system, this part clips directly onto the end of the…
Just added more wall mount screw holes. and split the roller body for easier printing.
Typical bearing, uses .177 BBs. Stop print around layer 23-24 to insert BBs. Ensure zhop is high enough so the extruder does not knock the BBs out. Slow print speed down as well helps to keep them in place.
This project is a bottom filament guide system designed to improve filament feeding for the Creality Ender-3 V3 KE. The goal of this design is to provide smoother and more controlled filament movement when feeding from below, reducing…
2/16/26 - Sorry to the few of you that downloaded this already, I uploaded incomplete files. The initial file labeled "arm" was the left side and the spool holder was incomplete. All files are fixed and properly labeled now
I needed to store some bearings I had lying around, so I designed this to hold exactly 10 units. This container has a snap-fit lid with an additional lip to keep dust or debris out—whether you're storing metal skate bearings or 3D-printed…
since I had 608zz ball bearing lying around and didn't want to by the smaller ones, I've adapte the rollers and the basis to fit the lager bearings. I've also added the axis to avoid using the M5 screws
lego 90195 30044 30046 30045 20309 60808 40066 35565 4218
Greetings from Canada! ?share=copy&fl=sv&fe=ci I decided to try my hand at making a print in place bearing using a planetary gear system and herringbone teeth for stability. This is the end result and I am happy to say that it has worked…
Provides an upgrade to a 608 bearing on MoonCool TK1 bikes. Use at your own risk. Better idea: don't buy a mooncool - worst build quality I've seen on a $1000+ product. Cheap off the shelf foreign components slapped onto a frame.
I found three useful designs and merged them to become a 4 bearing horizontal spool holder with a quick release spool hub. The hub is detachable from the base for ease of loading on a new spool. The design uses 4 off 608 bearings and the…
Many of the spool holder models with ball bearings I found had an issue with the thread alignment. You often have to choose between tightening the parts properly or aligning them correctly. Because of that, I designed this model so the…
Simple and easy print. Turntable for taking pictures or videos of objects. Could probably be used for 3D scanning too. Requires one 608 bearing - I like the Yellow Jacket Print instructions: Bed: Print with the top part down on the bed. I…
Filament spool holder for the Snapmaker U1 printer. The design is based on a cylindrical structure with two standard 608 / 608Z bearings. It allows the spool to rotate very smoothly and freely, while also supporting all spool sizes,…
These are 3d printed rods for replacing the M8 threaded rods needed for this IKEA drybox model: It prints alright vertically in a core-xy printer - even though it already flexes around on top. Use a brim for adhesion. Bed slingers…
3D printable 608 bearings. If you need a different size bearing, the FreeCAD file is included. Update 2026-04-18: Added a model with half-inch (12.7mm) nominal inner diameter for use with half-inch dowel rods (see photo). It maintains the…
The PolyDryer XL’s stock handle/roller system is clever, but physics is a tough critic. A 3kg spool creates significant friction on a simple plastic tube, which can lead to underextrusion or unnecessary wear on your printer’s gears. This…
Created the parts, I used the simple Microsoft 3D Builder. Printed all parts on my Mk4 printer. Prusa's engineers who designed their spools need to go back to the drawing board and re-design the center, 51mm, slot. The "speed bumps"…
OpenSCAD screwtop container customerizer generated storage container for 608zz/ Z809 bearings in various sizes. Printing material: PLA bottom / top layer: concentric infill: 15% OpenSCAD screwtop container customerizer settings The…
For 2 years, I have had the model "Sunflower Windmill" uploaded. It was showered with likes and won first place in the Floral Design Contest. Back then, I already provided a simple mod for 608 ball bearings for my Patreon members. Now I…
This model is designed to hold ISDT 608PD Battery Charger in Gridfinity Plate , which I use primarily for charging up my batteries for FPV-Drone, and so require it always to be at the easy to reach spot :) If there are questions or…
Case for MT3608 Step-Up Boost Converter Module. Cable strain relief integrated (only if the cable is not too thin). The potentiometer is accessible from the outside. Has cooling vents. Print Settings Printer: Wanhao Duplicator i3 V2…
This is a mod of StephanieS spool roller for the Stacker F-Box It is adapted to use 608z bearings and with a smaller outer cylinder diameter for spools with an inner diameter of 50mm or bigger It also includes an M6 allen key hole for…
Designed to stop spool crawl onto the bearings Print how you want - use supports to make sure its perfect Fits Creality Standard Mount Print Settings Printer Brand: Creality Printer: K1 Rafts: No Supports: Yes Resolution: .2 Infill: 30% +…
High Edge to reduce crawl, wide spool support, side mounted on K1Max
Replace ball bearings that spin too easily with these print-in-place friction bearings. Can oil/grease them if the plastic tolerates it. I printed in ASA at 0.2 mm layer height. Provided here are three gap tolerances depending on how…
Hello! I used the following designs to create this mount: CR-10 Streamlight Microstream Holster by i_need_a_better_name on Thingiverse SKADIS Universal Hook - base and modified hooks by galvanization I printed at 100% infill in PLA with…
After creating the simple spool with sleeve for my Neptune 4 I always wanted to have one with bearings. I like HugoHuge's design , but it is too long and bulky, so not possible to use with 250g reels I have. Also, the design has to be…
A holder for 100mm wide spools with offcentered bearings to eliminate spool wobbling druring print.
This model can be printed in PLA, PETG, and whatever other stiff filament you have lying around. The print settings for this thing aren't too specific but I would make sure my bed adhesion is good before printing especially for the gears.…
I would print this with a brim if you are using PETG and a bed slinger. I used 0.2 mm layer height with good results and I made mine out of PETG; I have not tested PLA. Just default infil and 3 layer walls will work. It has a capacity of…
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
A standard 608ZZ bearing with an outer diameter of 22mm , a shaft diameter of 8mm , and a height of 7mm , with modeled end covers and internal balls. Nothing special, just a good way to store a functional model for future projects.…
This model is compatible with the lego system.
I used bolt 8x120mm, two M8 nuts and two 608zz bearings. Simply put bearings to each side of holder tube. Put M8 bolt through bearings and holder thread. On side of holder thread tighten the nuts against each other. You can see complete…
For the GratKit filament dryer, I upgraded the included roller by adding 608zz bearings. This modification significantly improves the roller's smoothness and reduces friction during operation, ensuring a more consistent filament feed. The…
This 3D-printed pocket hole jig features a slot designed for a 608ZZ bearing, offering guidance while drilling pocket holes. 15 degree angle 608ZZ bearing Flat spot for clamp Print settings: Infill 25% Walls: At least 3, more walls will…
This tool allows safe and easy insertion of the bearings into a fidget spinner. Bearing insertion force is only applied to the outer bearing race.
Toroidal Windmill - Self adjusting turbine The smooth spinning Bearing Mod from the popular ‘Toroidal Windmill'. Insta Reel The mod uses 608 (6x22x8) Bearings for smooth & fast long time spinning. Beautiful Windmill with Toroidal…
PTFE filament tube guide for adventurer 5m. For assembly you need M3 screws and a 608z bearing. I also attached .STEP files if you need to make a version for the bearing you have.
After trying out most of the other fidget roller designs, I found most of them lacking in one way or another. Specifically none had the kind of solidity and stability I wanted from the design. So I got to prototyping and eventually came…
Use 4.5 MM BBs and after printing line up the 2 slots and put them in. If you want it to be smoother make sure your Z-seams are on random and after printing put some pencil lead or vegetable oil on it.
I have an abundance of F668-2Z bearings and needed some 608ZZ bearings for a project so I made this adapter. You will need to print 1 of the adapter and 2 of the spacers, one for each side of the bearing.
The spool holder is just another alternative for the LACK enclosure. It uses two bearings of 608 2Z (e.g. https://www.ebay.de/itm/20-St%C3%BCck-Rillenkugellager-608-2Z-Kugellager-608-ZZ-8x22x7-mm-Miniatur/292622440951 ). The roll is…
I downloaded and printed many 608 bearings. None of them satisfied me. Half printed balls were flying around in my printer or the bearing had too much play or other problems. So, after a lot of experimenting, drawing, test printing and…
Adjustable Filament Spool Roller with 608 Bearings Designed to fit any spool with very little material use. No supports required. Does not take up much storage space when not in use. The part needs to be printed twice. The bearings (608)…
Modulo de caja para MT3608 que puede ser adquirido aqui: https://es.aliexpress.com/item/1005006102572363.html Instrucciones de armado: Se deben imprimir todas las piezas especificadas, el archivo bajo la etiqueta (support) no es…
Remixed from Sun Spinner (No Bearings) . Scaled to 110% from original, thickened to 7mm, parts widened for best printings and then modified to accept the 608ZZ Bearing. Requires. 1 x 608ZZ Bearing. Print with your favourite thermoplastic…
The bearing is a push fit. Hardware: 2x M5 T-Nuts 2x M5x16 or M5x12 Bolts
(FILAMENTO ABC o PET)(SE RECOMIENDA ABC) 2x Rodamiento 608 RS 2x Arandelas M8 de ala corta 2x Tuercas M8 autoblocantes 2x Tuercas M8 "normales" 1x Tuerca M6 autoblocante 1x Tornillo M8 de 40mm 1x Tornillo M8 de 30mm 1x Tornillo M6 de 30mm…
SZN Triple Square Harbor Freight Gridfinity part number 16083
The size of tube inner walls in the sourced model was not optimal and 2 inner walls can't be printed without constant interruptions which leads to very long printing time. I optimized it by changing the inner wall width. Also I manually…
There are already several re-mixes of this spool holder for the FLSUN QQ, but none support the 608 zz bearings I already have. The only difference from the original are 2 holes for m4 screws that are used to mount it to the top of the…
This is a cleaning Jig for 608 Bearings. It has 2 parts: Jig: For holding the 608 bearing and cleaning fluid Rod: Attach one end to your drill and the tapered end into the 608 bearing Use: I had a bunch of cheap 608 Bearings that no…
Initially wanted to use jltx's design to have the same functionality but soon realized that the spool would be at an angle and not parallel to the printer. The hex cut-out model is still provided (as a best effort) in case an extra…
This is a fully printable 608 ball bearing. You will need to print the ball with a brim. Everything should be printed slow with 100% infill. You should print 10 balls. To assemble put the outside and the bottom on a flat surface and slip…
Decided i did not want to pay $10 for rollers everytime they get worn out so i made my own! Press fit 2x 608zz bearings Supports required for the bottom bearing overhang; no support required for upper body.
This 608 bearing is fully printable, robust, reliable, somewhat dust/dirtproof and easy to assemble. Since filament has a tight tolleranced outer diameter, it makes for the perfect roller in this bearing. Even if your printer has its…
When you need transform a 608zz bearing into a tire or simply add to it some rubber for 3d carriage application or make the bearing can roll over an alluminium profile, you can use this thing. It's a rubber with the dimmensions of the 608…
This carriage is based on http://www.thingiverse.com/thing:2202796 . Congratulations for your design! It was adapted for using with 608zz bearing. There are two parts: carriage and ball support. The ball support has 51mm between balls,…
I noticed there was drag when using the stock filament guide/filament sensor so I made a guide that fits on the left vertical support. I decided to go this way because there is a protective sleave that covers the wires that go to the…
Remixed to fit a Cosori tray so that I can print while drying filament. Print with at least PETG for temperature resistance. 4 608zz bearings 2 M3 6-8mm bolts 3 M8 40mm bolts Dryer Walls can be found here .
The design of this part was driven by the need to minimize friction between the holder wheels and the spool. When manually rewinding filament between spools to create longer samples, I often encountered issues at higher speeds where the…
This is a case for the 2A Micro USB boost converters found all over AliExpress . The chip used is an MT3608 but the chip is marked as "B6286 (K)" I use mine to test my 12v projects from a 5v USB powerbank instead of firing up the bench…
I designed this spool stand to be used with 8 millimeters metal ball bearings. The stand is made out of 3 pieces to be printed with no support. However I propose 2 different diameters for the rolls: Ball bearing 628 compatible: 8x24x8…
Für den Druck habe ich PETG Prusament verwendent. Nun schon einige Monate im Fahrzeug verbaut und hält ohne Probleme. Ich habe es auf meinem Prusa XL Multi Tool gedruckt mit standard Einstellungen. Die zwei Nasen habe ich nach dem Druck…
53mm spool adapter with 608z bearing hole Category: 3D Printer Accessories
My model is 20cm in diameter but if you downloaded the F3D file and changed the sketch in Fusion 360 you could customize it to other sizes. I don't recommend going much bigger, the edges already can touch and grind on each other if not…
608 Bearing Filament Guide for Dry Box | SPOOL HOLDER
I recommend printing in PETG! All screws can be ¾"-length ¼-20 screws, and the mounting screws can also be standard wood screws. Mounting holes are 45mm apart. I've also included a .step file if you want to adjust these holes in any way.
I liked both designs of this holder, yet I needed it to hold on the wall by itself, like the original non-motorized one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15% Filament: doesn't matter…
Bought some super cheap plastic storage (not an affiliate link) at Dollar Tree with the intention of using them at single-spool stackable storage that I could dump some desiccant in. Needed some sort of lazy Susan to be able to feed…
I created a GPS tracker project in GitLab: liligoa7608-gps . I needed a case for a Liligo T-A7608E-H board and here it is. You will need additionally: 6 pieces of M3x35 screws 2 pieces of M3 nuts, those goes into the corners' of the box's…
Skipping Rope or Jump Rope Handle It features a standard 608 skateboard bearing. It is held together using four self-tapping wood screws. Each handle consists of three parts, the front and back of the handle and the knot holder. The…
I made some changes based on the original design. 1) The bracket now uses M5 socket cap, and recesses in the bracket. 2) The bracket has 2mm offset for extra clearance for Voron printers. 3) The spindle has a ridge built in to keep the…
