1 / 2
M3 hardware to 8mm 608 Bearing Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
A quick adapter to use common M3 screws to secure 608 bearings. Not as strong as using an 8mm bolt - but plenty secure for a lot of projects.
Hardware needed:
- M3 x 25mm FHCS screw
- M3 nylon lock / nyloc nut
Print as oriented. No supports needed.
Modeled for a total shaft length around 22mm but easily modifiable for other lengths. STEP files included.