1 / 2
M3 hardware to 8mm 608 Bearing Adapter — zdjęcie 1
1 / 2

M3 hardware to 8mm 608 Bearing Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to use common M3 screws to secure 608 bearings

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
107
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

A quick adapter to use common M3 screws to secure 608 bearings.  Not as strong as using an 8mm bolt - but plenty secure for a lot of projects.

Hardware needed:

  • M3 x 25mm FHCS screw
  • M3 nylon lock / nyloc nut

Print as oriented.  No supports needed.

Modeled for a total shaft length around 22mm but easily modifiable for other lengths.  STEP files included.

Tagi