1 / 1
608zz / Z809 bearing screw top containers — image 1

608zz / Z809 bearing screw top containers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Screw top containers for various amounts of608zz / Z809 bearings.

Rating
5 / 5
Likes
11
Downloads
31
Makes
1
Views
149
Reviews
1

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

OpenSCAD screwtop container customerizer generated storage container for 608zz/ Z809 bearings in various sizes.

Printing

  • material: PLA

  • bottom / top layer: concentric

  • infill: 15%

OpenSCAD screwtop container customerizer settings

The following settings were used in OpenSCAD screwtop container customerizer, if this makes no sense to you, refer to the OpenSCAD customizer docs.

{
    "parameterSets": {
        "Z809x2": {
            "$fa": "1",
            "$fn": "180",
            "$fs": "0.4",
            "assembly_cut_through": "true",
            "diameter": "33",
            "inside_pot": "true",
            "inside_pot_diameter": "5",
            "inside_pot_hollow": "false",
            "inside_pot_neck": "true",
            "inside_pot_rounding": "2",
            "knurl_chamfer": "1",
            "knurl_count": "12",
            "knurl_depth": "1.2",
            "knurl_width": "5",
            "part": "assembly",
            "pot_height": "10",
            "thread_margin": "0.4",
            "thread_neck_height": "10",
            "wall_thickness": "2"
        },
        "Z809x4": {
            "$fa": "1",
            "$fn": "180",
            "$fs": "0.4",
            "assembly_cut_through": "true",
            "diameter": "33",
            "inside_pot": "true",
            "inside_pot_diameter": "5",
            "inside_pot_hollow": "false",
            "inside_pot_neck": "true",
            "inside_pot_rounding": "2",
            "knurl_chamfer": "1",
            "knurl_count": "12",
            "knurl_depth": "1.2",
            "knurl_width": "5",
            "part": "assembly",
            "pot_height": "18",
            "thread_margin": "0.4",
            "thread_neck_height": "16",
            "wall_thickness": "2"
        },
        "Z809x8": {
            "$fa": "1",
            "$fn": "180",
            "$fs": "0.4",
            "assembly_cut_through": "true",
            "diameter": "33",
            "inside_pot": "true",
            "inside_pot_diameter": "5",
            "inside_pot_hollow": "false",
            "inside_pot_neck": "true",
            "inside_pot_rounding": "2",
            "knurl_chamfer": "1",
            "knurl_count": "12",
            "knurl_depth": "1.2",
            "knurl_width": "5",
            "part": "assembly",
            "pot_height": "46",
            "thread_margin": "0.4",
            "thread_neck_height": "16",
            "wall_thickness": "2"
        },
        "Z809x10": {
            "$fa": "1",
            "$fn": "180",
            "$fs": "0.4",
            "assembly_cut_through": "true",
            "diameter": "33",
            "inside_pot": "true",
            "inside_pot_diameter": "5",
            "inside_pot_hollow": "false",
            "inside_pot_neck": "true",
            "inside_pot_rounding": "2",
            "knurl_chamfer": "1",
            "knurl_count": "12",
            "knurl_depth": "1.2",
            "knurl_width": "5",
            "part": "assembly",
            "pot_height": "60",
            "thread_margin": "0.4",
            "thread_neck_height": "16",
            "wall_thickness": "2"
        },
        "Z809x16": {
            "$fa": "1",
            "$fn": "180",
            "$fs": "0.4",
            "assembly_cut_through": "true",
            "diameter": "33",
            "inside_pot": "true",
            "inside_pot_diameter": "5",
            "inside_pot_hollow": "false",
            "inside_pot_neck": "true",
            "inside_pot_rounding": "2",
            "knurl_chamfer": "1",
            "knurl_count": "12",
            "knurl_depth": "1.2",
            "knurl_width": "5",
            "part": "assembly",
            "pot_height": "74",
            "thread_margin": "0.4",
            "thread_neck_height": "16",
            "wall_thickness": "2"
        },
        "Z809x20": {
            "$fa": "1",
            "$fn": "180",
            "$fs": "0.4",
            "assembly_cut_through": "true",
            "diameter": "33",
            "inside_pot": "true",
            "inside_pot_diameter": "5",
            "inside_pot_hollow": "false",
            "inside_pot_neck": "true",
            "inside_pot_rounding": "2",
            "knurl_chamfer": "1",
            "knurl_count": "12",
            "knurl_depth": "1.2",
            "knurl_width": "5",
            "part": "assembly",
            "pot_height": "102",
            "thread_margin": "0.4",
            "thread_neck_height": "16",
            "wall_thickness": "2"
        }
    },
    "fileFormatVersion": "1"
}

Tags