1 / 1
608zz / Z809 bearing screw top containers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw top containers for various amounts of608zz / Z809 bearings.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 149
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (24)Powiązane
OpenSCAD screwtop container customerizer generated storage container for 608zz/ Z809 bearings in various sizes.
Printing
material: PLA
bottom / top layer: concentric
infill: 15%
OpenSCAD screwtop container customerizer settings
The following settings were used in OpenSCAD screwtop container customerizer, if this makes no sense to you, refer to the OpenSCAD customizer docs.
{
"parameterSets": {
"Z809x2": {
"$fa": "1",
"$fn": "180",
"$fs": "0.4",
"assembly_cut_through": "true",
"diameter": "33",
"inside_pot": "true",
"inside_pot_diameter": "5",
"inside_pot_hollow": "false",
"inside_pot_neck": "true",
"inside_pot_rounding": "2",
"knurl_chamfer": "1",
"knurl_count": "12",
"knurl_depth": "1.2",
"knurl_width": "5",
"part": "assembly",
"pot_height": "10",
"thread_margin": "0.4",
"thread_neck_height": "10",
"wall_thickness": "2"
},
"Z809x4": {
"$fa": "1",
"$fn": "180",
"$fs": "0.4",
"assembly_cut_through": "true",
"diameter": "33",
"inside_pot": "true",
"inside_pot_diameter": "5",
"inside_pot_hollow": "false",
"inside_pot_neck": "true",
"inside_pot_rounding": "2",
"knurl_chamfer": "1",
"knurl_count": "12",
"knurl_depth": "1.2",
"knurl_width": "5",
"part": "assembly",
"pot_height": "18",
"thread_margin": "0.4",
"thread_neck_height": "16",
"wall_thickness": "2"
},
"Z809x8": {
"$fa": "1",
"$fn": "180",
"$fs": "0.4",
"assembly_cut_through": "true",
"diameter": "33",
"inside_pot": "true",
"inside_pot_diameter": "5",
"inside_pot_hollow": "false",
"inside_pot_neck": "true",
"inside_pot_rounding": "2",
"knurl_chamfer": "1",
"knurl_count": "12",
"knurl_depth": "1.2",
"knurl_width": "5",
"part": "assembly",
"pot_height": "46",
"thread_margin": "0.4",
"thread_neck_height": "16",
"wall_thickness": "2"
},
"Z809x10": {
"$fa": "1",
"$fn": "180",
"$fs": "0.4",
"assembly_cut_through": "true",
"diameter": "33",
"inside_pot": "true",
"inside_pot_diameter": "5",
"inside_pot_hollow": "false",
"inside_pot_neck": "true",
"inside_pot_rounding": "2",
"knurl_chamfer": "1",
"knurl_count": "12",
"knurl_depth": "1.2",
"knurl_width": "5",
"part": "assembly",
"pot_height": "60",
"thread_margin": "0.4",
"thread_neck_height": "16",
"wall_thickness": "2"
},
"Z809x16": {
"$fa": "1",
"$fn": "180",
"$fs": "0.4",
"assembly_cut_through": "true",
"diameter": "33",
"inside_pot": "true",
"inside_pot_diameter": "5",
"inside_pot_hollow": "false",
"inside_pot_neck": "true",
"inside_pot_rounding": "2",
"knurl_chamfer": "1",
"knurl_count": "12",
"knurl_depth": "1.2",
"knurl_width": "5",
"part": "assembly",
"pot_height": "74",
"thread_margin": "0.4",
"thread_neck_height": "16",
"wall_thickness": "2"
},
"Z809x20": {
"$fa": "1",
"$fn": "180",
"$fs": "0.4",
"assembly_cut_through": "true",
"diameter": "33",
"inside_pot": "true",
"inside_pot_diameter": "5",
"inside_pot_hollow": "false",
"inside_pot_neck": "true",
"inside_pot_rounding": "2",
"knurl_chamfer": "1",
"knurl_count": "12",
"knurl_depth": "1.2",
"knurl_width": "5",
"part": "assembly",
"pot_height": "102",
"thread_margin": "0.4",
"thread_neck_height": "16",
"wall_thickness": "2"
}
},
"fileFormatVersion": "1"
}