Dustproof Storage (10u) for 608 Bearings - Snap-Fit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep your bearings clean, organized, and ready to roll with this purpose-built 608 Bearing Vault
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to store some bearings I had lying around, so I designed this to hold exactly 10 units. This container has a snap-fit lid with an additional lip to keep dust or debris out—whether you're storing metal skate bearings or 3D-printed ones.
Holds 10 Bearings: Fits standard 608 bearings (22mm OD, 8mm ID, 7mm width) snugly.
Snap-Fit Lid with Dust Lip: The lid clicks securely into place, and the recessed lip creates a seal to minimize dust ingress.
Universal Compatibility: Works perfectly with both metal bearings and 3D printed bearing models (as shown in images).
Snug Fit: Bearings sit tight without rattling, but are easy to remove when needed.
Printing Specifications:
No Supports Needed
Nozzle: Printed on a 0.4mm nozzle
Layer Height: 0.2mm
Adhesion: A brim is recommended for the base to ensure bed adhesion, but definitely not needed.
Use sequential printing for a better surface finish.
Make sure the orientation is proper, and the big flat surfaces are on the buildplate
Happy printing!