Dustproof Storage (10u) for 608 Bearings - Snap-Fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your bearings clean, organized, and ready to roll with this purpose-built 608 Bearing Vault
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to store some bearings I had lying around, so I designed this to hold exactly 10 units. This container has a snap-fit lid with an additional lip to keep dust or debris out—whether you're storing metal skate bearings or 3D-printed ones.
Holds 10 Bearings: Fits standard 608 bearings (22mm OD, 8mm ID, 7mm width) snugly.
Snap-Fit Lid with Dust Lip: The lid clicks securely into place, and the recessed lip creates a seal to minimize dust ingress.
Universal Compatibility: Works perfectly with both metal bearings and 3D printed bearing models (as shown in images).
Snug Fit: Bearings sit tight without rattling, but are easy to remove when needed.
Printing Specifications:
No Supports Needed
Nozzle: Printed on a 0.4mm nozzle
Layer Height: 0.2mm
Adhesion: A brim is recommended for the base to ensure bed adhesion, but definitely not needed.
Use sequential printing for a better surface finish.
Make sure the orientation is proper, and the big flat surfaces are on the buildplate
Happy printing!