1 / 5
Leote K1 Family 608ZZ Bearing Spool Holder — image 1
1 / 5

Leote K1 Family 608ZZ Bearing Spool Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I like me the bearing spools, but the sides are angled differently from the one on the back of the printer.

Rating
0 / 5
Likes
3
Downloads
15
Makes
0
Views
101
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I added the K1 style slip ring, then rotated it to fit the Leote's Sidle panel. It should fit the all the side panels Leote has released for the K1 Family, but posting them all as remixes to show up on the earlier ones seems to me a little excessive, and I like the flexibility the Multiboard gives. 

I am not sure if the slip ring on the side panels being rotated at a different angle then the back of the printer was a design choice, or an accident, but it means that anything designed for the its at a 45-ish degree angle on the side panel.

I originally was using the 60MM with the U-Joint, but found that it was maybe slightly bogger then the average roll. Though I dod not have an issue with it sliding off, I still opted for the larger 80MM. I added the option for either the U-Joint or the Direct connection. I found the U adapter pushed the 60MM roll alittle further out, making it longer then it would sound. Oh well, I had already had the design in use, so why not add it. The U-Joint does make removing the spool easier if your switching to a drybox and back constantly, but I have had the filament on a new Filament spool slip off and get tangled around the U-Joint, lifting it up off the printer. Thaty brand now sits on some rollers on the ground when new.

You will need 2x 608 zz Bearings. This is a common size for Roller Skates, Blades, and Skateboards, and can be purchased easily from a local skate shop or online through vendors like Amazon . The very top of the lock that reality uses has all the pressure, and is the weak point. I would suggest increasing wall thickness and infill to add strength to the area, and the whole holder in general

Tags