1 / 1
Traxxas Wheel Wrench 17 mm (FreeCAD) — zdjęcie 1

Traxxas Wheel Wrench 17 mm (FreeCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This 17 mm splined wheel wrench is commonly used for 17 mm hex nuts in model RC cars.

Ocena
5 / 5
Polubienia
8
Pobrania
42
Wydruki
1
Wyświetlenia
81
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

This 17mm splined wheel wrench is commonly used for 17mm hex nuts in model RC cars.

It is a really cheap tool that you can buy e.g. vom Traxxas for only 3 $ but the problem is... when you urgently need it, it is missing, lost or you forgot to order it.

No problem! You have a 3D printer - no reason to wait. Print it.

The supplied model is parameteric and prints well on modern 3D printers. In case you have tolerance problems with your printer, you may adjust the two parameters wrench_diameter and hex_radius. From a mathematical point of view, this value should be 17mm divided by the square root of 3 (resulting in 9.81 mm) - the configured value of 9.9mm makes sure that the wrench fits smoothly.

Have fun and enjoy your printed Wheel Wrench, or at least use it to learn something useful about FreeCAD.

Tagi