1 / 4
Rock Shox ZEB Fender — 3D Printable Mud Guard for Enduro & Downhill MTB (29" / 27.5") — zdjęcie 1
1 / 4

Rock Shox ZEB Fender — 3D Printable Mud Guard for Enduro & Downhill MTB (29" / 27.5")

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Purpose-Built 3D Printable Fender for Rock Shox ZEB Fork — Enduro & Downhill Ready.

Ocena
0 / 5
Polubienia
3
Wydruki
0
Wyświetlenia
255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Mud? Never Again. The Perfect Fender for Your Rock Shox ZEB Fork!

If you're running a Rock Shox ZEB fork, you know the problem: in wet conditions, mud and debris hit everything — your tire, fork, and face. This 3D printed fender was designed specifically for the Rock Shox ZEB, delivering a perfect fit without compromises or workarounds.

Key Features & Benefits:

PERFECT FIT: Engineered specifically for the Rock Shox ZEB fork — no trimming, no improvising, just bolt-on performance.

TWO WHEEL SIZES: Compatible with both 29" and 27.5" — one design, two ride options.

ENDURO & DOWNHILL READY: Tough enough for aggressive trail riding, enduro races, and downhill runs.

WEATHERPROOF: Printed in ASA+ (Superfilament) — UV-stable, slightly flexible, and fully weatherproof for all-season trail use.

OPTIMIZED GEOMETRY: Maximum mud protection with minimal weight — no compromises.

What You Need (Hardware not included):

Mounting hardware depending on your existing clamp setup (zip ties or original mount)

3D Printing Recommendations:

Material: ASA+ (essential for outdoor durability and UV resistance). Alternative: PETG (slightly more flexible, also UV-stable). Do NOT use PLA outdoors.

Printer: Ender 3 Plus | Nozzle: 0.6mm | Layer Height: 0.24mm

Print Temperature: 245°C | Build Plate: 85°C | Infill: 100%

Fan Speed: 15% | Supports: Yes | Adhesion: Brim

Pro-Tip: ASA+ remains flexible enough at low temperatures to absorb rock strikes without cracking — significantly better than PLA or standard ABS.

Included Files: .3MF | .STL

Keep your trail clean — print it, mount it, ride!

Questions? Feel free to send a message.

Tagi