Liczymy pasujące modele…
I was unable to buy them, so I replicated them. Use only if necessary and at your own risk. But they work just like the original for me. The shape is a bit different due to printing without supports. You should print with more resistant…
This is my current version of the Rockshox Zeb bolt on front mudguard/fender. Fits 27.5" tires, not sure yet about 29". If you print it for a 29er and there is clearence issues please let me know so I can adjust the model! Mounts using 3x…
Hey, i created this Rockshox seal installation tool for 35mm seals like Pike / Lyric / Yari Forks. i would recommend 25-30% infill. 5top, 5bottom
A set of front and rear MTB mudguards with a RockShox logo. STEP files included so you could modify or scale. Could be printed in two colors.
This front fender is a two piece design that contains a front and rear piece. It was designed for a 29 inch wheel setup, so it will look slightly different with 27.5 inch wheels. Printing Instructions: At least 30% infill (I used…
Bottomless Tokens and Gnar Dog Tokens reduce air volume in your rear shock and create greater progression at the end of the shock's travel. Add or remove tokens to tune your shock's bottomless feel. Gnar Dog Tokens are equivalent to 2.5…
Low profile RockShox Dust/Oil Installation Tool for forks using 35mm stanchions. Fits satisfyingly with a "click" on the dust seal. Designed to have a very small footprint to save space in the toolbox for other stuff. Opensource design:…
Cable clamp for Front fork Print instructions Category: Sport & Outdoors
This is a basic mudguard that prints in 2 parts. I have designed a long version and a medium version. I was gonna make a short one but never got to it as I felt there isnt really a need. Ive printed it in PETG using 100 walls to achieve a…
RockShox purple bottomless token / volume spacers. This is for 2023 RockShox Super Deluxe Shocks that use the thinner purple volume spacers. I printed it on my Mini, with X and Y sizing set to 101.3% and Z to 100.5% in the slicer. Printed…
Pretty much a straight-up copy of the Newmen TC adapter because that's the simplest, most elegant solution that I've seen. In fact, the Newmen adapter is inexpensive and such a nice fix I'd suggest you just buy it from them and give them…
That's a Clampset for Mountainbike Mechanics, Hobbists, DIYers and much more. It is compatible with most Fox and Rockshox forks and shocks. Never tested it, so I am waiting for your opinion.
Token for the rockshox super deluxe air shock. The standard size and 1.5x the standard size available. there is also a .step file in case you want to further customize it. MAKE SURE TO RESPECT THE MAX NUMBER OF TOKENS IN YOUR SHOCK! DO…
A mud flap for the rear wheel on my MTB. There are two print versions, one mirrored and one plain.
Made for my RockShox 35Gold RL but should work with other RockShox forks just use an M6 bolt to hold it on. STL file.
Chamferless 1/2in drive sockets designed to fit damper and air spring top caps on mountain bike suspension forks. This set includes common sizes for Fox, Marzocchi, and Rockshox forks. For reference, the 26mm socket printed with Prusament…
This adapts from 35mm ID Fox springs found on many shocks (DNM Burner, DVO, Cane Creek) to 38mm ID Rockshox springs. Make it from something with good compressive strength and 99 perimeters. As shown briefly in this video.
I created a Rock Shox logo that you can put on your prints (eg. a mud guard)
This is an old design that I imported from my prints on Thingiverse. I needed to remove the top cap from the airspring on my Rockshox Sid. This can be done with a cassette tool but mine has a centre pin to locate it on the shaft/cassette.…
If your RockShox fork has the cutout for the “Torque Cap” hubs, but you have standard hubs, it can be tough to line up the front wheel with the thru-axle. Originally this could be fixed with the original design which had to be glued in…
Valve Cap for RockShox bike suspension fork and similar. Thread is M8x0.75 Suitable for RockShox Lockout Knob and RockShox Lockout Fix Cap
This is for the 1/2" size DU Bushing for Fox and most other brands of rear shock Originally I ordered a new DU Bushing (rear shock eyelet bushing) and the bushing tool for my mountain bike. The bushing showed up; but the tool never…
Printed with PETG, 15% Infill. No Support. You'll also need an M6 socket head cap screw and an M6 nut. Consider decreasing the layer height on the top section of the AirTag bracket model. The walls in that area are relatively thin, which…
Designed this socket to service my rockshox suspension(xc32) and made it to fit on my 1/4" torque wrench. Printed in PLA and it works really well for ocasional services at home. I recommend printing by side to take advantage of the layers…
Simple snug fitting plug for the bottom of a steerer tube of RockShox Lyrik 2021 fork
complete redesign of the source. Fork crown adapted to RockShox 35 TK Silver installed in the Scott Genius eride. Mounting is done with 2 stainless steel screws 5x10 Print Settings Printer: VORON 2.1 Rafts: Doesn't Matter Supports: Yes…
Allows you to adjust the floodgate opening amount on motion control forks with non-adjustable floodgates. Print instructions PLA works fine. This prints as a single layer so just scale it in Z to adjust the amount of shimming you add,…
The RockShox Judy is missing threads to attach a mudguard. This Adaptor fits into the struts of the fork bridge and is secured using zip ties (max. 7mm width). It uses a standard M6 bolt with 10mm hex-head and a nut (preferably nylock).…
Simple and lightweight plug. The finger cutouts proved useless, so I offer two versions: with them (Type1) and without (Type2). Recommended Print Settings: Material: TPU Layer height: 0.2mm Walls: 2 Infill: 15% Top/Bottom shell: 4
Rockshox token for 35 mm stanchion, token diameter 30 mm, screw thread M27x1
The cable guide fits most Rockshox forks from 2013-2023. The thread for the bolt is M3 and should be about 15-20mm long. The design is slightly different to the original, but a little lighter.
Helpful for installing wiper seals
Designed to replace broken U-turn knob on RockShox Judy fork
This is a replacement lockout switch for a front suspension Rockshox fork. My fork is a coil fork, so I don't know if it works with their air forks. It was attached with a sheet metal/wood coarse thread screw. An octagonal inset in the…
Rockshox Air Cap Remover Tool My mountainbike has a rockshox fork and on top it has a cap to protect the airnippel. Even when I just finger tight the cap back it is hard to remove because it has only a tiny handle to untighten it. With…
plug for use with rockshox zeb 160mm travel 38mm plungers fits with pushfit and can hold airtag
Volume Spacer to reduce the air chamber of the Rock Sox fork. It should fit for most Rock Shox forks: Pike Solo Air since 2014 Lyrik Solo Air since 2016 Yari Solo Air since 2016 BoXXer Solo Air since 2011 Revelation RC since 2018 I would…
A simple tool to place correctly the Wiper Seals on Rock Shox Lyrik or Yari forks. The crown is taken in to consideration and the tool relies on the legs to insert to the right depth the seal and to insert it straight. Can be printed from…
You need two DIN 439B M4 nuts. Pause the print, set in the nuts and continue the print. As shown in the pictures, you can use the screws supplied with the RRP mudguard. You only need a countersunk head screw for the middle one.
After using Supjj's tool on our Fox suspensions, we needed something for our family's growing fleet of Rockshox forks. This tool allows for easy removal of the air cover cap without tears. Printed in PLA, 3 walls, 15% crosshatch infill…
Other front axle mounts available here are perfectly fine, but i needed one with a bit more clearance for the Rockshox ZEB fork's rebound-adjuster-cap.. So i made this one. Print Settings: PLA+ or PETG 20-30% infill does print fine…
Just a simple mount for a RockShox Fork/Shock Pump. You can use the T-Nuts for Ikea Skadis Pegboards system to mount it to ikea skadis. I didn't add the T-Nuts aligment guide so you can align the holder so the pump hangs straight. For…
Da der Original Adapter der mit dem Mudrocker von SKS mit geliefert wurde bei mir nicht Passte habe ich diesen Adapter entwickelt der Formtechnisch besser aussieht und Passt!
Adapter for fitting RRP mudguard to rockshox zeb fork. Tried it on 2022 model, not the 2023. This is v2.0. It requires a zip tie for extra security and m3 bolt and washer. Uses other screws from RRP mudguard kit. Do not torque the…
Lockout knob for RockShox air suspension forks, easy to print without support. Suitable for RockShox Valve Cap
Tool to bleed the Rock Shox AXS Dropper Post on its Vent Valve System. Follow the Rockshox official tuturial video (Youtube) for instructions how to use. Quick fix if your dropper post feels squishy and needs a bleed. Duration of the…
Rockshox SKS mudguard adapter / Adapter für SKS Schutzblech an Rockshox Paragon Gold Federgabel
The SID SL Ultimate comes with a very simple, very minimal rebound adjuster. It's just a small 2.5mm L key pressed into a plastic clip that holds it on the lower fork nut. It's surprisingly light at only 4.2g, but I was curious if I could…
I designed this model to replace my original RockShox Judy Silver TK AIR PopLoc housing since my original one got broken. Fits and works for me since year! Should be printed at least with PETG / PC / ASA Print quality: 0.2mm (Higher print…
This is an Extractor for Fox Racing Shox Lower Leg Bushings. There is the video that explains how to use it! This version works well with 32mm forks. I don't know if it will work with the stepcast version. Printing it in pla (100% infill)…
Lockout knob for RockShox air suspension forks. It's designed for Recon 335, but it might work for some other forks too.
this is a remix to make the plug fit a 32mm steerer tube
fits on the bottom of your token stack. it will never see the sun so it is ok to print with PLA. the pitch of the thread is relatively small. So, I recommend 0.1 layer height on that area for best results
Adjuster knob for rockshox forks. adjust for your fork Uses a 2.5mm hex key updated to have a longer grab in the middle for the key Print instructions Category: Sport & Outdoors
Leitungsführung für Rock Shox Boxxer/Lyrik/Zeb für die neuen Modelle ab 2022 Sie unterscheidet sich leicht vom Original, da das zum drucken zu filigran gewesen wäre.
I lost the rubber pressure release valve dust covers for my Rockshox Zeb Ultimate. I printed these from TPU 95A and they seem to fit well.
Cap for RockShox air suspension fork. If you need a fixed position for lockout knob. Put it on 8-edged knob, turn it and press down on 6-edged nut and fix it with a countersunk screw. Easy to print without supports. Suitable for RockShox…
i bought rock shox recon but its have defect - hydro line holder war broken so i make model for this u can use it as u want no any limitation a also add fusion360 original file i print with petg with many walls no cooling and small speed…
This is a 3D printable replica of the official RockShox Vent Valve Tool (part #TL-RVBT-VNTV-A1), designed for quick and easy maintenance of RockShox Reverb dropper seatposts. The tool allows you to activate the vent valve without…
Needed a lower profile LSC knob for the Charger 3 RC2 damper in my RockShox Zeb forks. so that they cleared the down tube. Printed, tested, fitted, functions great. Supports shouldn't be needed, print upside-down at 100% infill with good…
Simple adapter for bleeding RS seatposts. Thread size M5 Print settings: Speed: slow (based on your printer capabilties) Material: PLA works just fine (with lower temps) Perimeters: 5 Layer Height: .12 mm Supports: No Use brim
Doporučuji alespoň PETg, ale PLA nejakou dobu taky vydrží. Minimálně 4 perimetry a min 15-20%výplň. Recomanded PETg, but PLA is also fine for few days. Minimum of 4 perimetres and minimum 15-20% infill
These are the parts necessary to put together a remote lockout system for your front Rockshox suspension fork. Compatibility not guaranteed. How I Designed This http://www.alshub.com/Blog/Entries/2011/5/20_Putting_it_All_together.html &…
RockShox Mudguard-MTB/Downhill, printed in TPU
fits Rock Shox Deluxe Ultimate 2023+ RS-DLX-ULT-C1
This is my version of dust seal aligment tool for popular Pike fork. Recommended slicer settings for strength: filament: ABS/ASA infill: 20-25% walls: 2mm top/bottom: 3mm Category: Hand Tools
The Rockshox Recon suspension fork doesn't have a top mounting hole for a mudguard. This adapter provides a way to mount a mudguard. It fits into the top bridge of the fork and is secured by zip ties. An M5 bolt, pushed through the…
Jaws for 27.35mm Rockshox charger RC seal head, similar to 00.4318.029.000
INSTALATION: “reba_cover_body.3mf” should be printed “snug fit”, it needs to be pressed on 24mm hex screw firmly and it needs to be a little bit tilted(1mm is enough) to make crown work(crown need to hold a spring in a motion control…
I did not need the remote lockout for my SID fork. However I also did not want to completely modify the damper cartridge and take out the spring. Therefore I designed a manual lockout conversion kit that is quite simple. It only needs a…
Should not be used to fully tighten on forks that have a direct 24mm 'bolt' on the top, Should be fine on forks that use a cassette tool, my cassette tool had a 24mm ‘bolt’ on top. This should be used to aid in damper, airspring or…
Replacement for SRAM Part Number 11.4018.082.023 Designed to accept heat set insert for setscrew.
This model can be printed using ams or by doing a manual fillament swap.
AirLink RockShox Zeb, the adapter allows you to use quick-fit adapters for 4mm ptfe tubes, the tuning reduces progression by passing the air from the sheath containing the hydraulics to the sheath containing the air and vice versa. The…
Soft Jaws for Rockshox Monarch Sevice. Print in PETG. With holes for 1x5mm Magnets.
Why I Made This On all the RockShox forks I’ve owned, the small plastic spool housing eventually broke—usually right at the spot where the ferrule sits. To avoid replacing the same weak part again and again, I designed a stronger…
Remixed from the fender design created by ChPech . I modified the design to print on a shorter printer. It prints in 4 pieces rather than 2. I added an extended interface to make it easy to glue the parts together. I just used super glue.…
Ordered a new DU Bushing (Rear Shock Eyelet Bushing); plus a DU Bushing Tool for my for my mountain bike. The bushing showed up, but the tool never did...... So I decided to try a 3D printed one; which worked surprisingly well. Use a 4mm…
Hello, Somedays ago I break the handlebar mount in metal of my Rockshox Reverb Stealth after a crash. I modeled it on Fusion 360. I printed with PLA with 60% density. Maybe it better to print it whit PETG or ABS for better resistance. I…
A cover for the bottom of the crown for a Rock Shox Reba Race Prevents dirt and water going into the steerer tube. You can print it in a color that suits you and you fork/bike design
Air valve opener for Rockshox forks (maybe will fit to other brands, not tested). When you want to pump more air to your fork (or just check with manometer) sometime it is hard to open that top air valve cap with hand as it may be fit…
Halterung für 2 Lichter auf der Rockshox Paragon Gold. Nutze ein Nabendynamolicht mit Bremslichtfunktion und ein normales Ebike-Licht. Zum Anpassen auch die Step dabei oder einfach Tinkercad. 2x M3 (25-30mm) incl. Muttern nötig für die…
I needed to convert a 2018 RockShox Recon RL Gold from 140mm to 120mm travel. RockShox don't sell 30mm spacer for this fork, only 10 and 20mm. Designed based on 10mm spacer which was installed in the 140mm travel Recon and pictures, so…
RockShox monarch volume reduse printable petg. A cut is required for installation.
Intro I made this alternative mount, because I didnt like the way the original looked and that the cable went straight down from the handlebars. For this mod you only need a single M4 nut. The other fasteners are reused from the original.…
Designed so that you can attach and remove a mudguard to your forks quickly without having to use zip ties that result in wasted time, fiddly installation and wastage every time you want to remove your mudguard. Permanently zip tie the…
Made in TPU98a FormFutura, knob with big fillets to avoid cuts and leg scratches since the original knob is harsh on the bottom and has a short peg to lock/unlock easily. The best way to print is to use a dual extruder printer. the main…
A mold to clamp a freshly 3D printed front mudguard, such as the stylish one from here! https://www.thingiverse.com/thing:4317969 If you are quick in transferring a finished and heated/flexible PETG flat mudguard to the mold, it will fit…
It goes on the rebound/compresion knobs and can be torned with a 8mm hex key
This IFP insert tool is made specific for Reverb Stealth C1 Dropper Posts. It inserts the IFP 55mm into the tube. It has a fat lip to prevent it from going in too far. It can be printet in any material that is not too soft. I have…
Vice soft jaws for clamping the upper or lower section of a 30.9 AXS Reverb Dropper. The magnets I used are 5mm diameter x 2mm and are friction fit but you could also glue them. I printed these with 60% infill to ensure they will hold up…
This is a simple socket for installing (and removing) the Rock Shox rear shock bearing kit. It designed to accept a 3/8" socket driver. I recommend printing it solid (100% infill). It's only a 10g part. It should be fine, even in PLA, to…
This is a quick mockup of the plastic lockout dial on a RockShox Judy SL. It should be printable with no supports. This is here for people to take and remix for their needs. It will not do much in its current state (it would be hard to…
This is a clip for rockshox shock pump handle. TO install it, you only need a ziptie to hold it in place.
Best if printed with TPU but other materials should work ( be careful if you use a brittle material to no break it inside the cartige..
This gets put in the lower hole of the steertube, use one o-ring in the groove to be sure it doesn't go out
Hi, I bought a new dropperpost and forggot to buy a handelbar mount for it. Then I found and printed the model form @timo9799_2020501 but it broke. So I made it stronger and thicker and printed it in PETG. Now it works just fine. Remixed…
V2 of the manual lockout conversion kit. You will need a spring e.g. from a ball pen that has a diameter of about 4mm. You might have to play around with the sizing of the spring. It should be strong enough to keep the locker in place,…
I created a matching 1:1 spring retainer plug for the 2009/2010 RockShox Boxxer Team. The thread fits perfectly to the dimensions inside. I printed it on PETG and so far it's holding up and nothing is happening with it. Filling : 25% I…
I recall seeing these hub stiffeners being sold by trek/ bontrager but now I cant find them, so I made my own. Longer on goes on hub side with disc brake. Increases stiffness by increasing hub face/ fork face contact area from 22 to 34mm.…
