24mm 1/4" Socket for Rockshox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this socket to service my rockshox suspension(xc32) and made it to fit on my 1/4" torque wrench.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 197
- Wydruki
- 2
- Wyświetlenia
- 1415
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed this socket to service my rockshox suspension(xc32) and made it to fit on my 1/4" torque wrench.
Printed in PLA and it works really well for ocasional services at home.
I recommend printing by side to take advantage of the layers strengh and it will need supports. Also use more perimeters.
IMPORTANT: I use this tool with 7.3Nm and it can handle, but If you need more torque, this tool maybe not work for you. As advised in comments it break within the 1/4" drive area
Print instructions
Category: Tools Summary
Designed this socket to service my rockshox suspension(xc32) and made it to fit on my 1/4" torque wrench.
Printed in PLA and it works really well for ocasional services at home.
I recommend printing by side to take advantage of the layers strengh and it will need supports. Also use more perimeters.
IMPORTANT: I use this tool with 7.3Nm and it can handle, but If you need more torque, this tool maybe not work for you. As advised in comments it break within the 1/4" drive area
Print Settings
Printer Brand: Creality
Printer: Ender 3
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 30~50%
Filament: Esun PLA + PLA Grey