1 / 10
MTB Action Cam Mount — Ahead Cap & Spacer for GoPro / Action Cameras (1 1/8") — zdjęcie 1
1 / 10

MTB Action Cam Mount — Ahead Cap & Spacer for GoPro / Action Cameras (1 1/8")

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount Your GoPro Directly on Your Stem — No Expensive Adapters Needed. Fits all 1 1/8" ahead stems.

Ocena
0 / 5
Polubienia
4
Pobrania
28
Wydruki
0
Wyświetlenia
156
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Your GoPro Belongs on the Trail — Not in Your Pocket!

Forget expensive adapters and wobbly clamps. This 3D printed action cam mount replaces your standard ahead cap on the stem, giving you a stable, perfectly centered camera position — directly on your MTB, with no added weight and no drilling required.

🔑 Key Features & Benefits:

SMART INTEGRATION: Combines ahead cap + spacer into one part — the camera sits perfectly centered above the stem, just like a GoPro cockpit mount.

UNIVERSAL COMPATIBILITY: Fits all standard 1 1/8" ahead stem systems. Compatible with GoPro, DJI Osmo Action, Insta360, and any action cam using a GoPro-style mount.

STABLE & VIBRATION-RESISTANT: Direct integration into the stem area minimizes vibration — sharper footage, stable perspective.

NO PROPRIETARY ACCESSORIES NEEDED: Saves money compared to expensive handlebar adapters or branded camera mounts.

EASY SWAP: Remove old ahead cap, screw this in — done in minutes.

🔧 What You Need (Hardware not included):

1× M5×50 Hex Head Bolt

1× M5 Nut

2× M5 Washers

→ Available at any hardware store for around €1–2.

🖨 3D Printing Recommendations:

Material: ASA+ (highly recommended — UV-stable for outdoor use, heat-resistant). Alternative: PETG.

Printer: Ender 3 Plus

Nozzle: 0.8mm

Layer Height: 0.24mm

Print Temperature: 245°C

Build Plate: 80°C

Infill: 100%

Fan Speed: 15%

Supports: No

Adhesion: Brim

💡 Pro-Tip: Don't overtighten the M5 bolt — optimal tension gives stability without damaging the thread. Hand-tight + 1/4 turn is ideal.

📦 Included Files:

- .STL

- .3MF

Print it, mount it, ride it — your trail is waiting!

Questions or feedback? Feel free to reach out.

Tagi