Jeep Wrangler fender screw block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fender screw block for a Jeep Wrangler TJ stock fender to replicate the stock plastic piece.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is a simple fender screw block for a Jeep Wrangler TJ stock fender replicating the stock plastic piece. They sometimes break, strip or get lost. There's plenty of ways to attached the fender, but this is a straightforward replacement for the stock piece. The fender screw just screws into the hole in the plastic block.
To build the model I more or less replicated the stock one's dimensions using the calipers and best-guesses. I printed in Prusament PLA which has been working fine, but if you're feeling fancy you might use something more environmentally stable. You might need to adjust scaling for the screw to fit nicely.